@inproceedings{1b4d879cdfb54c8b90db1c683f39b10d,
title = "Design study for base station transceiver of wideband CDMA system",
abstract = "An experimental implementation of the base station transceiver for wideband CDMA system is presented in this paper. The whole design can be divided into three main parts: transmitter, receiver and frequency synthesizer. Commercial RF ICs are adopted in the circuit design thus made the system small enough to fit into a single PCB. The RF direct modulation technique.eliminated the intermediate frequency stage from the transmitter to make the system more compact and better performance is achieved. For the receiver, when the arrived RF signal level is as low as -95.1 dBm, the bit error ratio(BER) of the binary output can retain a proper value 10-3 for voice communication. The receiver's dynamic range is over 70 dB under its AGC loop. These test results are good enough to meet the standard performance requirements.",
keywords = "Transceiver, Wideband CDMA",
author = "Bin Ni and Qiang Wang and Jianzhong Qian and Ke Gong",
note = "Publisher Copyright: {\textcopyright} 2000 IEEE.; 2nd International Conference on Microwave and Millimeter Wave Technology, ICMMT 2000 ; Conference date: 14-09-2000 Through 16-09-2000",
year = "2000",
doi = "10.1109/ICMMT.2000.895665",
language = "English",
series = "ICMMT 2000 - 2000 2nd International Conference on Microwave and Millimeter Wave Technology",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
pages = "235--238",
booktitle = "ICMMT 2000 - 2000 2nd International Conference on Microwave and Millimeter Wave Technology",
address = "United States",
}