Nondestructive Surface Crack Detection of Laser‐Repaired Components by Laser Scanning Thermography

As a revolutionary new technique, laser‐engineered net shaping (LENS) is a layer additive manufacturing process that enables accurate, rapid and automatic repair of industrial component damage. In the laser repair (LR) process or in service, surface cracks can appear, which have a det-rimental effect on the repair quality and the mechanical performance; therefore, the surface crack detection of repaired components has attracted much attention. Laser spot thermography is an important nondestructive testing method with the advantages of non‐contact, full‐field and high pre-cision, which shows great potential in the crack detection of repaired components. The selection of thermographic process parameters and the optimization of thermal image processing algorithms are key to the success of the nondestructive detection. In this paper, the influence of material properties and thermographic process parameters on the surface temperature gradient is studied based on the simulation of laser spot thermal excitation, and the selection windows of thermographic process parameters for iron‐based and nickel‐based alloys are obtained, which is applied to the surface crack detection of repaired components. To improve the computational efficiency of thermal im-ages, the Prewitt edge detection algorithm is used in the thermal image processing, which realized fast extraction of cracks with a high signal‐to‐noise ratio (SNR), and the detection sensitivity of crack width can reach 10 μm. To further study the influence of surface roughness on the thermographic detection, repair layers with and without polishing process are characterized, which show that the Prewitt edge detection algorithm is well applicable to crack detection on surfaces with different roughness level.