Experimental and finite element studies on hot sizing process for L-shaped composite beams

This work aims at developing a hot sizing process on composite materials to correct the profiles of composite structures during manufacture. Hot sizing experiments were carried out at 150 °C with different sizing loads and hot sizing periods for L-shaped composite beams made of carbon fiber plain-weave fabric and epoxy resin. To predict the springback in hot sizing process, a corresponding finite element simulation method was developed using stress relaxation equations determined at the same temperature. Excellent agreements between the predicted and observed results were obtained. The effects of the component thickness and 45° ply percentage on the springback rate were investigated by simulation. Springback rate in hot sizing process on composite materials ranges from 60% to 95%. In conclusion hot sizing process is proved to be a valid method for compensation for the process-induced deformation (PID) of L-shaped composite beams.