Design and preparation of composite coatings with increased reflectivity under high-energy continuous wave laser ablation

High-energy continuous wave (CW) laser ablation can cause severe damage to structural materials in an extremely short time, which generates considerable concern in terms of material safety. For the purpose of reducing or even eliminating such laser-induced damage, a novel composite coating consisting of a boron-modified phenolic formaldehyde resin incorporating ZrC and SiC has been designed and prepared. The experimental results reveal that ZrC and SiC are rapidly oxidized to ZrO₂ and SiO₂ respectively, leading to the formation of a white ceramic layer consisting of ZrO₂ particles and melted SiO₂. After ablation at 1000 W/cm² for 50 s, elemental analysis indicates that no Si can be found in the central ablation zone because of gasification. A relatively compact ZrO₂ layer is formed through the sintering of adjacent ZrO₂ particles, which effectively improves the reflectivity of the coating from 7.3% (before ablation) to 63.5% (after ablation). The high reflectivity greatly reduces the absorption of laser energy. In addition, no obvious ablation defects are observed in the composite coating. The excellent anti-laser ablation performance of the coating makes it a promising system for protecting a material against the effects of long-term CW laser ablation.