Vision measurement method for impact point in large planar region

Meilian Liu*, Kejie Li, Huimin Cai, Ping Song

*此作品的通讯作者

科研成果: 书/报告/会议事项章节会议稿件同行评审

6 引用 (Scopus)

摘要

On the basis of summarizing the methods of camera calibration, a new method of direct geometric solution (DGS) based on calibration objects is proposed. It is required to establish some beacons in particular position with equal height in measurement area. Adjust camera carefully to ensure that the measurement plane is orthogonal to the image plane of the camera. The DGS model which is used to calculate the coordinates of points in measurement area is built with the pinhole imaging model and the coordinates of calibration objects. The comprehensive error caused by measurement error was simulated in MATLAB with DGS model, and the experiment of actual measurement was done. The experiment data was processed respectively by the DGS model and the DLT (direct linear transformation) model. The results show obviously that both the accuracy and error stability of DGS are better than ones of DLT. The average relative error of DGS in this experiment is 0.5%. The DGS model is better than the DLT model in locating the impact point in remote large area.

源语言英语
主期刊名Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010
379-383
页数5
版本PART 2
DOI
出版状态已出版 - 2010
活动2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010 - Dalian, 中国
期限: 13 8月 201015 8月 2010

出版系列

姓名Proceedings of 2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010
编号PART 2

会议

会议2010 International Conference on Intelligent Control and Information Processing, ICICIP 2010
国家/地区中国
Dalian
时期13/08/1015/08/10

指纹

探究 'Vision measurement method for impact point in large planar region' 的科研主题。它们共同构成独一无二的指纹。

引用此