Study on pore characteristics of flocs and sludge dewaterability based on fractal methods (pore characteristics of flocs and sludge dewatering)

To study the influence of floc characteristics on dewatering performance of excess sludge, a fractal method is adopted to characterize the sludge flocs formed at different flocculation time. The sludge is conditioned with cationic polyacrylamide (CPAM) and the fractal dimensions (two-dimensional fractal dimension D_f and one-dimensional fractal dimension D₁) of flocs are solved by employing image analysis. The specific resistance to filtration (SRF) and expression tests are conducted to estimate the dewatering performance of the conditioned sludge. The results indicate that sludge flocs are multilevel structure and the fractal dimension is able to monitor the sludge conditioning process, which can be divided into three stages: (1) primary particles form flocculi; (2) flocculi collide with one another, group to form flocs; (3) equilibrium stage. The critical flocculation times of these stages are 45 s and 150 s respectively. At the beginning of flocculation, D_f increases and D₁ diminishes dramatically because compact and regular flocculi are formed owing to the neutralizing of the cationic contained in CPAM. Subsequently, D_f decreases and D₁ increases slightly because of the forming of flocs with a looser structure. Finally, the D _f and D₁ are almost constant (with a maximum deviation of 1.1% and 2% respectively) due to the fixed internal structure and superficial morphology of the floc. In order to improve the sludge dewaterability, the optimal CPAM dosage is 3.0 kg/t DS for a good dewaterability. Under this condition, the sludge floc is the most compact and regular with the highest (two-dimensional)/lowest (one-dimensional) fractal dimension (D_f: 1.86 and D₁: 1.19) on the equilibrium stage. The specific filtrate speed and the SRF of the conditioned sludge are 2.86 mL/s and 5.12 × 10¹¹ m/kg respectively. After conditioning 45 s (flocs forming stage), a dewatering step can be applied to remove the water contained in sludge and shorten the time.