Study on fuel-based emission factors from construction equipment

Ming Liang Fu; Yan Ding; Hang Yin; Zhe Ji; Lin Xiao Yu; Bin Liang; Yun Shan Ge

Study on fuel-based emission factors from construction equipment

Ming Liang Fu, Yan Ding, Hang Yin, Zhe Ji, Lin Xiao Yu, Bin Liang, Yun Shan Ge^*

^*此作品的通讯作者

机械与车辆学院

科研成果: 期刊稿件 › 文章 › 同行评审

10 引用（Scopus）

摘要

In this study, emission tests were performed on 45 typical construction equipment by using portable emission measurement system (PEMS) to obtain their emission factors. Test cycles include idling, moving and working. Result showed that variations occurred on moving and working cycles, while most of peaks happen on working cycle. Emission characteristics based on fuel consumption were analyzed and emission inventory were calculated according to the measurement data and fuel consumption survey data. The results show that fuel-based emission factors of CO and HC are higher on idling operating mode, while NO_x and PM are higher on working mode. Fuel-based emission factors of CO, HC, and PM are higher from bulldozer than those from other equipment. Compared with stage I equipment, the fuel-based emission factors of stage II equipment lower to a certain extent.

源语言	英语
页（从-至）	138-142
页数	5
期刊	Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology
卷	34
期	2
出版状态	已出版 - 2月 2014

其它文件与链接

链接到 Scopus 的出版物

引用此

Fu, M. L., Ding, Y., Yin, H., Ji, Z., Yu, L. X., Liang, B., & Ge, Y. S. (2014). Study on fuel-based emission factors from construction equipment. Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology, 34(2), 138-142.

@article{c9fca1396bf8489d9a307ecb0491d852,

title = "Study on fuel-based emission factors from construction equipment",

abstract = "In this study, emission tests were performed on 45 typical construction equipment by using portable emission measurement system (PEMS) to obtain their emission factors. Test cycles include idling, moving and working. Result showed that variations occurred on moving and working cycles, while most of peaks happen on working cycle. Emission characteristics based on fuel consumption were analyzed and emission inventory were calculated according to the measurement data and fuel consumption survey data. The results show that fuel-based emission factors of CO and HC are higher on idling operating mode, while NOx and PM are higher on working mode. Fuel-based emission factors of CO, HC, and PM are higher from bulldozer than those from other equipment. Compared with stage I equipment, the fuel-based emission factors of stage II equipment lower to a certain extent.",

keywords = "Construction equipment, Emission factor, Emission rate, Portable emission measurement system (PEMS)",

author = "Fu, {Ming Liang} and Yan Ding and Hang Yin and Zhe Ji and Yu, {Lin Xiao} and Bin Liang and Ge, {Yun Shan}",

year = "2014",

month = feb,

language = "English",

volume = "34",

pages = "138--142",

journal = "Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology",

issn = "1001-0645",

publisher = "Beijing Institute of Technology",

number = "2",

}

TY - JOUR

T1 - Study on fuel-based emission factors from construction equipment

AU - Fu, Ming Liang

AU - Ding, Yan

AU - Yin, Hang

AU - Ji, Zhe

AU - Yu, Lin Xiao

AU - Liang, Bin

AU - Ge, Yun Shan

PY - 2014/2

Y1 - 2014/2

N2 - In this study, emission tests were performed on 45 typical construction equipment by using portable emission measurement system (PEMS) to obtain their emission factors. Test cycles include idling, moving and working. Result showed that variations occurred on moving and working cycles, while most of peaks happen on working cycle. Emission characteristics based on fuel consumption were analyzed and emission inventory were calculated according to the measurement data and fuel consumption survey data. The results show that fuel-based emission factors of CO and HC are higher on idling operating mode, while NOx and PM are higher on working mode. Fuel-based emission factors of CO, HC, and PM are higher from bulldozer than those from other equipment. Compared with stage I equipment, the fuel-based emission factors of stage II equipment lower to a certain extent.

AB - In this study, emission tests were performed on 45 typical construction equipment by using portable emission measurement system (PEMS) to obtain their emission factors. Test cycles include idling, moving and working. Result showed that variations occurred on moving and working cycles, while most of peaks happen on working cycle. Emission characteristics based on fuel consumption were analyzed and emission inventory were calculated according to the measurement data and fuel consumption survey data. The results show that fuel-based emission factors of CO and HC are higher on idling operating mode, while NOx and PM are higher on working mode. Fuel-based emission factors of CO, HC, and PM are higher from bulldozer than those from other equipment. Compared with stage I equipment, the fuel-based emission factors of stage II equipment lower to a certain extent.

KW - Construction equipment

KW - Emission factor

KW - Emission rate

KW - Portable emission measurement system (PEMS)

UR - http://www.scopus.com/inward/record.url?scp=84898677040&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:84898677040

SN - 1001-0645

VL - 34

SP - 138

EP - 142

JO - Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology

JF - Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology

IS - 2

ER -

Study on fuel-based emission factors from construction equipment

摘要

其它文件与链接

指纹

引用此