Preparation of YSZ thin films for intermediate temperature solid oxide fuel cells by dip-coating method

Zhenhua Wang; Kening Sun; Shuiyun Shen; Naiqing Zhang; Jinshuo Qiao; Ping Xu

doi:10.1016/j.memsci.2008.04.038

Preparation of YSZ thin films for intermediate temperature solid oxide fuel cells by dip-coating method

Zhenhua Wang, Kening Sun^*, Shuiyun Shen, Naiqing Zhang, Jinshuo Qiao, Ping Xu

^*此作品的通讯作者

Harbin Institute of Technology

科研成果: 期刊稿件 › 文章 › 同行评审

47 引用（Scopus）

摘要

By studying the effects of different solvents, dispersants and solid loading amount on the suspension stability from sedimentation and viscosity experiments, a simple, effective and highly stable YSZ particle suspension based on MEK/EtOH was developed for dip-coating anode supported electrolyte films for intermediate temperature solid oxide fuel cells (IT-SOFCs). The morphologies of the prepared YSZ thin films from different dip-coating times were studied by scanning electron microscopy (SEM), and a film with a thickness of 16 μm by twice dip-coating was determined to be homogeneous, crack-free and well adherent to the anode substrate. The single cell assembled with this film presents an open-circuit voltage (OCV) of 1.01 V, and a maximum power density of 262 mW cm^-2 under H₂ as the fuel at 800 °C.

源语言	英语
页（从-至）	500-504
页数	5
期刊	Journal of Membrane Science
卷	320
期	1-2
DOI	https://doi.org/10.1016/j.memsci.2008.04.038
出版状态	已出版 - 15 7月 2008
已对外发布	是

访问文件

10.1016/j.memsci.2008.04.038

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{e281c829124a4eb582281fbdb2fe5d24,

title = "Preparation of YSZ thin films for intermediate temperature solid oxide fuel cells by dip-coating method",

abstract = "By studying the effects of different solvents, dispersants and solid loading amount on the suspension stability from sedimentation and viscosity experiments, a simple, effective and highly stable YSZ particle suspension based on MEK/EtOH was developed for dip-coating anode supported electrolyte films for intermediate temperature solid oxide fuel cells (IT-SOFCs). The morphologies of the prepared YSZ thin films from different dip-coating times were studied by scanning electron microscopy (SEM), and a film with a thickness of 16 μm by twice dip-coating was determined to be homogeneous, crack-free and well adherent to the anode substrate. The single cell assembled with this film presents an open-circuit voltage (OCV) of 1.01 V, and a maximum power density of 262 mW cm-2 under H2 as the fuel at 800 °C.",

keywords = "Dip-coating, Electrolyte, SOFC, Thin films, Yttria-stabilized zirconia (YSZ)",

author = "Zhenhua Wang and Kening Sun and Shuiyun Shen and Naiqing Zhang and Jinshuo Qiao and Ping Xu",

year = "2008",

month = jul,

day = "15",

doi = "10.1016/j.memsci.2008.04.038",

language = "English",

volume = "320",

pages = "500--504",

journal = "Journal of Membrane Science",

issn = "0376-7388",

publisher = "Elsevier B.V.",

number = "1-2",

}

TY - JOUR

T1 - Preparation of YSZ thin films for intermediate temperature solid oxide fuel cells by dip-coating method

AU - Wang, Zhenhua

AU - Sun, Kening

AU - Shen, Shuiyun

AU - Zhang, Naiqing

AU - Qiao, Jinshuo

AU - Xu, Ping

PY - 2008/7/15

Y1 - 2008/7/15

N2 - By studying the effects of different solvents, dispersants and solid loading amount on the suspension stability from sedimentation and viscosity experiments, a simple, effective and highly stable YSZ particle suspension based on MEK/EtOH was developed for dip-coating anode supported electrolyte films for intermediate temperature solid oxide fuel cells (IT-SOFCs). The morphologies of the prepared YSZ thin films from different dip-coating times were studied by scanning electron microscopy (SEM), and a film with a thickness of 16 μm by twice dip-coating was determined to be homogeneous, crack-free and well adherent to the anode substrate. The single cell assembled with this film presents an open-circuit voltage (OCV) of 1.01 V, and a maximum power density of 262 mW cm-2 under H2 as the fuel at 800 °C.

AB - By studying the effects of different solvents, dispersants and solid loading amount on the suspension stability from sedimentation and viscosity experiments, a simple, effective and highly stable YSZ particle suspension based on MEK/EtOH was developed for dip-coating anode supported electrolyte films for intermediate temperature solid oxide fuel cells (IT-SOFCs). The morphologies of the prepared YSZ thin films from different dip-coating times were studied by scanning electron microscopy (SEM), and a film with a thickness of 16 μm by twice dip-coating was determined to be homogeneous, crack-free and well adherent to the anode substrate. The single cell assembled with this film presents an open-circuit voltage (OCV) of 1.01 V, and a maximum power density of 262 mW cm-2 under H2 as the fuel at 800 °C.

KW - Dip-coating

KW - Electrolyte

KW - SOFC

KW - Thin films

KW - Yttria-stabilized zirconia (YSZ)

UR - http://www.scopus.com/inward/record.url?scp=46349108470&partnerID=8YFLogxK

U2 - 10.1016/j.memsci.2008.04.038

DO - 10.1016/j.memsci.2008.04.038

M3 - Article

AN - SCOPUS:46349108470

SN - 0376-7388

VL - 320

SP - 500

EP - 504

JO - Journal of Membrane Science

JF - Journal of Membrane Science

IS - 1-2

ER -

Preparation of YSZ thin films for intermediate temperature solid oxide fuel cells by dip-coating method

摘要

访问文件

其它文件与链接

指纹

引用此