TY - JOUR
T1 - Numerical study on fabricating rectangle microchannel in microfluidic chips by glass molding process
AU - Wang, Tao
AU - Chen, Jing
AU - Zhou, Tianfeng
N1 - Publisher Copyright:
© Published under licence by IOP Publishing Ltd.
PY - 2017/10/13
Y1 - 2017/10/13
N2 - This paper studied the glass molding process (GMP) for fabricating a typical microstructure of glass microfluidic chips, i. e., rectangle microchannel, on soda-lime glass by finite element method. More than 100 models were established on the platform of Abaqus/Standard. The influence of parameters, i. e., temperature, aspect ratio, side wall angle and friction coefficient on deformation were studied, and the predicted morphology of the molded microchannel were presented as well. The research could provide fundamental experience for optimizing GMP process in the future.
AB - This paper studied the glass molding process (GMP) for fabricating a typical microstructure of glass microfluidic chips, i. e., rectangle microchannel, on soda-lime glass by finite element method. More than 100 models were established on the platform of Abaqus/Standard. The influence of parameters, i. e., temperature, aspect ratio, side wall angle and friction coefficient on deformation were studied, and the predicted morphology of the molded microchannel were presented as well. The research could provide fundamental experience for optimizing GMP process in the future.
UR - http://www.scopus.com/inward/record.url?scp=85034103669&partnerID=8YFLogxK
U2 - 10.1088/1757-899X/242/1/012097
DO - 10.1088/1757-899X/242/1/012097
M3 - Conference article
AN - SCOPUS:85034103669
SN - 1757-8981
VL - 242
JO - IOP Conference Series: Materials Science and Engineering
JF - IOP Conference Series: Materials Science and Engineering
IS - 1
M1 - 012097
T2 - 2017 3rd International Conference on Applied Materials and Manufacturing Technology, ICAMMT 2017
Y2 - 23 June 2017 through 25 June 2017
ER -