Effect of Sintering Process on Microstructure and Mechanical Properties of Silicon Nitride

Jingyi Zhang, Jinpeng Fan, Xiaoming Liu, Jun Zhou, Dongchun Qie, Dahai Zhang

科研成果: 期刊稿件文章同行评审

4 引用 (Scopus)

摘要

Porous Si3N4 ceramics were produced through dry press shaping and gas pressure sintering. The effects of sintering temperature and holding time on the microstructure and mechanical properties of porous Si3N4 ceramics were investigated. The porosity, phase composition, flexural strength and elastic modulus of porous Si3N4 ceramics sintered at different sintering schedules were determined, and the microstructures of porous Si3N4 ceramics were analyzed. The results show that the density, α-Si3N4→β-Si3N4 transformation, β-Si3N4 grain growth and flexural strength of material increase when sintering temperature increases. The flexural strength and the porosity of porous Si3N4 prepared at sintering temperature of 1 900 ℃ and holding time of 15 min are 106 MPa and 49%, respectively.

源语言英语
页(从-至)806-810
页数5
期刊Kuei Suan Jen Hsueh Pao/ Journal of the Chinese Ceramic Society
45
6
DOI
出版状态已出版 - 1 6月 2017
已对外发布

指纹

探究 'Effect of Sintering Process on Microstructure and Mechanical Properties of Silicon Nitride' 的科研主题。它们共同构成独一无二的指纹。

引用此