Wireless circuits design for neural recording application

Ruoyuan Qu; Na Liu; Zhe Guo; Xinghua Wang; Xiaoyan Gui

doi:10.1109/TSP.2013.6614004

Wireless circuits design for neural recording application

Ruoyuan Qu, Na Liu, Zhe Guo, Xinghua Wang, Xiaoyan Gui^*

^*Corresponding author for this work

School of Integrated Circuits and Electronics

Beijing Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

A couple of radio-frequency integrated circuits working at 2.4G-2.5GHz are presented as wireless transmitter and receiver for neural signal recording application. The transmitter is consisted of a two bits digital logic controlled voltage control oscillator with cross-coupled to provide the carrier, an on-off keying modulator for bandwidth and power consumption consideration and a power amplifier based on IEEE STD802.15 transmitter characteristics. The receiver contains a low noise amplifier and an on-off keying demodulator. Fabricated in a 0.18 μm CMOS process and tested in a neural acquisition system, the IC prototype occupies 2.88mm² and works functionally, which can be a wide solution for wireless neural signal processor.

Original language	English
Title of host publication	2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013
Pages	596-599
Number of pages	4
DOIs	https://doi.org/10.1109/TSP.2013.6614004
Publication status	Published - 2013
Event	2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013 - Rome, Italy Duration: 2 Jul 2013 → 4 Jul 2013

Publication series

Name	2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013

Conference

Conference	2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013
Country/Territory	Italy
City	Rome
Period	2/07/13 → 4/07/13

Keywords

Voltage control oscillator (VCO)
Wireless technique
low noise amplifier(LNA)
on-off keying (OOK)
power amplifier (PA)

Access to Document

10.1109/TSP.2013.6614004

Cite this

Qu, R., Liu, N., Guo, Z., Wang, X., & Gui, X. (2013). Wireless circuits design for neural recording application. In 2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013 (pp. 596-599). Article 6614004 (2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013). https://doi.org/10.1109/TSP.2013.6614004

@inproceedings{9c8355e5090e4fa4b964e1c9942ae835,

title = "Wireless circuits design for neural recording application",

abstract = "A couple of radio-frequency integrated circuits working at 2.4G-2.5GHz are presented as wireless transmitter and receiver for neural signal recording application. The transmitter is consisted of a two bits digital logic controlled voltage control oscillator with cross-coupled to provide the carrier, an on-off keying modulator for bandwidth and power consumption consideration and a power amplifier based on IEEE STD802.15 transmitter characteristics. The receiver contains a low noise amplifier and an on-off keying demodulator. Fabricated in a 0.18 μm CMOS process and tested in a neural acquisition system, the IC prototype occupies 2.88mm2 and works functionally, which can be a wide solution for wireless neural signal processor.",

keywords = "Voltage control oscillator (VCO), Wireless technique, low noise amplifier(LNA), on-off keying (OOK), power amplifier (PA)",

author = "Ruoyuan Qu and Na Liu and Zhe Guo and Xinghua Wang and Xiaoyan Gui",

year = "2013",

doi = "10.1109/TSP.2013.6614004",

language = "English",

isbn = "9781479904044",

series = "2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013",

pages = "596--599",

booktitle = "2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013",

note = "2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013 ; Conference date: 02-07-2013 Through 04-07-2013",

}

Qu, R, Liu, N, Guo, Z, Wang, X & Gui, X 2013, Wireless circuits design for neural recording application. in 2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013., 6614004, 2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013, pp. 596-599, 2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013, Rome, Italy, 2/07/13. https://doi.org/10.1109/TSP.2013.6614004

Wireless circuits design for neural recording application. / Qu, Ruoyuan; Liu, Na; Guo, Zhe et al.
2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013. 2013. p. 596-599 6614004 (2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Wireless circuits design for neural recording application

AU - Qu, Ruoyuan

AU - Liu, Na

AU - Guo, Zhe

AU - Wang, Xinghua

AU - Gui, Xiaoyan

PY - 2013

Y1 - 2013

N2 - A couple of radio-frequency integrated circuits working at 2.4G-2.5GHz are presented as wireless transmitter and receiver for neural signal recording application. The transmitter is consisted of a two bits digital logic controlled voltage control oscillator with cross-coupled to provide the carrier, an on-off keying modulator for bandwidth and power consumption consideration and a power amplifier based on IEEE STD802.15 transmitter characteristics. The receiver contains a low noise amplifier and an on-off keying demodulator. Fabricated in a 0.18 μm CMOS process and tested in a neural acquisition system, the IC prototype occupies 2.88mm2 and works functionally, which can be a wide solution for wireless neural signal processor.

AB - A couple of radio-frequency integrated circuits working at 2.4G-2.5GHz are presented as wireless transmitter and receiver for neural signal recording application. The transmitter is consisted of a two bits digital logic controlled voltage control oscillator with cross-coupled to provide the carrier, an on-off keying modulator for bandwidth and power consumption consideration and a power amplifier based on IEEE STD802.15 transmitter characteristics. The receiver contains a low noise amplifier and an on-off keying demodulator. Fabricated in a 0.18 μm CMOS process and tested in a neural acquisition system, the IC prototype occupies 2.88mm2 and works functionally, which can be a wide solution for wireless neural signal processor.

KW - Voltage control oscillator (VCO)

KW - Wireless technique

KW - low noise amplifier(LNA)

KW - on-off keying (OOK)

KW - power amplifier (PA)

UR - http://www.scopus.com/inward/record.url?scp=84885678228&partnerID=8YFLogxK

U2 - 10.1109/TSP.2013.6614004

DO - 10.1109/TSP.2013.6614004

M3 - Conference contribution

AN - SCOPUS:84885678228

SN - 9781479904044

T3 - 2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013

SP - 596

EP - 599

BT - 2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013

T2 - 2013 36th International Conference on Telecommunications and Signal Processing, TSP 2013

Y2 - 2 July 2013 through 4 July 2013

ER -

Wireless circuits design for neural recording application

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this