TY - JOUR
T1 - Modulation format identification assisted by sparse-fast-Fourier-transform for hitless flexible coherent transceivers
AU - Lu, Jianing
AU - Tan, Zhongwei
AU - Lau, Alan Pak Tao
AU - Fu, Songnian
AU - Tang, Ming
AU - Lu, Chao
N1 - Publisher Copyright:
© 2019 Optical Society of America.
PY - 2019
Y1 - 2019
N2 - For hitless flexible coherent transceivers based next-generation agile optical network, efficient modulation format identification (MFI) is an essential element in digital signal processing (DSP) flow at the receiver-side (Rx). In this paper, we propose a blind and fast MFI scheme with high identification accuracy at low optical signal-to-noise ratio (OSNR) regime. This is achieved by first raising the signal to the 4th power and calculate the peak-to-average power ratio (PAPR) of the corresponding spectra to distinguish 32 quadrature amplitude modulation (QAM) from quadrature phase shift keying (QPSK), 16 and 64QAM signals. Then, followed by iterative partition schemes to remove signals with phase π 3π ± 4 , ± 4 (or QPSK-like phases) based on the signal amplitudes, the PAPR of the remaining signals is calculated to distinguish the other three formats. Additionally, by frequency offset (FO) pre-compensation, the spectrum can be obtained using sparse-fast-Fourier-transform (S-FFT), which greatly reduces the total complexity. The MFI performance is numerically and experimentally investigated by 28 Gbaud dual-polarization (DP) coherent optical back-to-back (B2B) and up to 1500 km standard single mode fiber (SSMF) transmission system using QPSK, 16QAM, 32QAM, and 64QAM. Results show that high identification accuracy can be achieved, even when OSNR is lower than that required for the 20% forward error correction (FEC) threshold of BER=2 ×10 -2 for each format. Furthermore, fast format switching between 64QAM-32QAM and 32QAM-16QAM are demonstrated experimentally for B2B scenario and 900 km SSMF with the proposed MFI technique, respectively.
AB - For hitless flexible coherent transceivers based next-generation agile optical network, efficient modulation format identification (MFI) is an essential element in digital signal processing (DSP) flow at the receiver-side (Rx). In this paper, we propose a blind and fast MFI scheme with high identification accuracy at low optical signal-to-noise ratio (OSNR) regime. This is achieved by first raising the signal to the 4th power and calculate the peak-to-average power ratio (PAPR) of the corresponding spectra to distinguish 32 quadrature amplitude modulation (QAM) from quadrature phase shift keying (QPSK), 16 and 64QAM signals. Then, followed by iterative partition schemes to remove signals with phase π 3π ± 4 , ± 4 (or QPSK-like phases) based on the signal amplitudes, the PAPR of the remaining signals is calculated to distinguish the other three formats. Additionally, by frequency offset (FO) pre-compensation, the spectrum can be obtained using sparse-fast-Fourier-transform (S-FFT), which greatly reduces the total complexity. The MFI performance is numerically and experimentally investigated by 28 Gbaud dual-polarization (DP) coherent optical back-to-back (B2B) and up to 1500 km standard single mode fiber (SSMF) transmission system using QPSK, 16QAM, 32QAM, and 64QAM. Results show that high identification accuracy can be achieved, even when OSNR is lower than that required for the 20% forward error correction (FEC) threshold of BER=2 ×10 -2 for each format. Furthermore, fast format switching between 64QAM-32QAM and 32QAM-16QAM are demonstrated experimentally for B2B scenario and 900 km SSMF with the proposed MFI technique, respectively.
UR - http://www.scopus.com/inward/record.url?scp=85062893225&partnerID=8YFLogxK
U2 - 10.1364/OE.27.007072
DO - 10.1364/OE.27.007072
M3 - Article
C2 - 30876279
AN - SCOPUS:85062893225
SN - 1094-4087
VL - 27
SP - 7072
EP - 7086
JO - Optics Express
JF - Optics Express
IS - 5
ER -