TY - JOUR
T1 - Synthesis, structure and electromagnetic properties of mesoporous Fe 3O4 aerogels by sol-gel method
AU - Zhang, Y.
AU - Chai, C. P.
AU - Luo, Y. J.
AU - Wang, L.
AU - Li, G. P.
PY - 2014/10
Y1 - 2014/10
N2 - The Fe3O4 aerogels have been prepared by the sol-gel method and subsequent supercritical drying with CO2, FeCl 3·6H2O, FeCl2·4H2O and propylene oxide was used as precursor and gelling accelerator, respectively. The result from XRD indicated that the aerogels were composed of nano-crystals. XPS was employed to further characterize the structure of products and confirmed the existence of Fe and O. SEM and TEM showed a fine microstructure of the as-prepared aerogels with three dimensional network, and the skeletons of aerogels were consist of interconnected nanoparticles. The Fe3O 4 aerogels also possessed quite low density (0.249-0.393 m 2 g-1), large specific surface area (60.26-330.20 m 2 g-1) and superior saturation magnetization (14.64-52.28 emu g-1). Moreover, the textural and magnetic properties of the aerogels could be controlled by solution concentration, molar ratio of propylene oxide (PO) to Fe3+ and calcination temperature. The fabricated Fe3O4 aerogels exhibited certain electromagnetic properties in the frequency range of 2-18 GHz, and the maximum value of tan δe and tan δm is 0.07 and 0.27, respectively.
AB - The Fe3O4 aerogels have been prepared by the sol-gel method and subsequent supercritical drying with CO2, FeCl 3·6H2O, FeCl2·4H2O and propylene oxide was used as precursor and gelling accelerator, respectively. The result from XRD indicated that the aerogels were composed of nano-crystals. XPS was employed to further characterize the structure of products and confirmed the existence of Fe and O. SEM and TEM showed a fine microstructure of the as-prepared aerogels with three dimensional network, and the skeletons of aerogels were consist of interconnected nanoparticles. The Fe3O 4 aerogels also possessed quite low density (0.249-0.393 m 2 g-1), large specific surface area (60.26-330.20 m 2 g-1) and superior saturation magnetization (14.64-52.28 emu g-1). Moreover, the textural and magnetic properties of the aerogels could be controlled by solution concentration, molar ratio of propylene oxide (PO) to Fe3+ and calcination temperature. The fabricated Fe3O4 aerogels exhibited certain electromagnetic properties in the frequency range of 2-18 GHz, and the maximum value of tan δe and tan δm is 0.07 and 0.27, respectively.
KW - Electromagnetic properties
KW - Ferromagnetic behavior
KW - Pore structure
KW - Sol-gel method
UR - http://www.scopus.com/inward/record.url?scp=84903143266&partnerID=8YFLogxK
U2 - 10.1016/j.mseb.2014.06.002
DO - 10.1016/j.mseb.2014.06.002
M3 - Article
AN - SCOPUS:84903143266
SN - 0921-5107
VL - 188
SP - 13
EP - 19
JO - Materials Science and Engineering: B
JF - Materials Science and Engineering: B
ER -