Study on characteristics and mechanism of re-entrainment in intake filtration components of the gas turbine

Aiming at the problem that the droplet re-entrainment in the intake filtration components affects the gas intake quality and the safe operation of gas turbines, the characteristics and mechanism of the re-entrainment in a marine double-hook inertial stage filter are studied, and the distribution of liquid film and re-entrainment under different inlet air velocities and droplet size distributions are compared. The results show that, due to the influence of inertia and turbulent dispersion, droplets tend to deposit on draining hooks and the lower surface of the leeward side of the blade to form a liquid film. Film stripping is the main form of re-entrainment under ship-driving conditions. Due to the high airflow velocity and the large film thickness, hook peaks are the most prone to film stripping, and the critical airflow for film stripping velocity is 14.8 m/s. With the increase of the inlet air velocity, the film thickness at the draining hooks increased first and then decreased, and the film stripping positions were extended from the hook peaks to the rear. Different droplet size distributions mainly affect the liquid film thickness at the draining hook and leeward side of the blade, which in turn affects the film stripping mass.