TY - JOUR
T1 - Preparation and properties of high emissivity Fe-Mn-matrix coatings by air plasma spraying
AU - Wang, H.
AU - Ning, X.
AU - Wang, Q.
AU - Liu, Y.
AU - Song, Y.
N1 - Publisher Copyright:
© W. S. Maney & Son Ltd 2015.
PY - 2015/5/1
Y1 - 2015/5/1
N2 - In this study, two kinds of high emissivity Fe-Mn-matrix feedstock powders were synthesised by spray drying and sintering using oxides of Fe, Mn, Ti, Cu, Co, and ZrO2/HfO2. The complex oxide coatings with these two powders were prepared by air plasma spraying. The emissivity of two coatings was measured at 800∼1200°C. The phase structure and microstructure of the powders and coatings were also characterised. The results show that the synthesised powders perform superior flowability after spray drying and sintering. The emissivity of Hf-Fe-Mn coating is about 0·85 at the temperature range from 800 to 1200°C, and that of Zr-Fe-Mn coating is 0·86 at the similar temperature range. The high emissivity can be attributed to the spinel phases such as FeCoCrO4, FeMn2O4, CoFe2O4 and Ti0·5Zr0·5O0·5, existed in the coatings and the high emissivity phases of HfO2 and ZrO2. The optimal sintering temperature of Hf-Fe-Mn powder is 1300°C to get the synthesised powders with best flowability and the coating with high emissivity.
AB - In this study, two kinds of high emissivity Fe-Mn-matrix feedstock powders were synthesised by spray drying and sintering using oxides of Fe, Mn, Ti, Cu, Co, and ZrO2/HfO2. The complex oxide coatings with these two powders were prepared by air plasma spraying. The emissivity of two coatings was measured at 800∼1200°C. The phase structure and microstructure of the powders and coatings were also characterised. The results show that the synthesised powders perform superior flowability after spray drying and sintering. The emissivity of Hf-Fe-Mn coating is about 0·85 at the temperature range from 800 to 1200°C, and that of Zr-Fe-Mn coating is 0·86 at the similar temperature range. The high emissivity can be attributed to the spinel phases such as FeCoCrO4, FeMn2O4, CoFe2O4 and Ti0·5Zr0·5O0·5, existed in the coatings and the high emissivity phases of HfO2 and ZrO2. The optimal sintering temperature of Hf-Fe-Mn powder is 1300°C to get the synthesised powders with best flowability and the coating with high emissivity.
KW - Emissivity
KW - Fe-Mn-matrix coating
KW - Oxides
KW - Plasma spraying
UR - http://www.scopus.com/inward/record.url?scp=84941274314&partnerID=8YFLogxK
U2 - 10.1179/1432891715Z.0000000001511
DO - 10.1179/1432891715Z.0000000001511
M3 - Article
AN - SCOPUS:84941274314
SN - 1432-8917
VL - 19
SP - S29-S33
JO - Materials Research Innovations
JF - Materials Research Innovations
ER -