Huang, W., Ye, Y., Chen, H., Vilá, R. A., Xiang, A., Wang, H., Liu, F., Yu, Z., Xu, J., Zhang, Z., Xu, R., Wu, Y., Chou, L. Y., Wang, H., Xu, J., Boyle, D. T., Li, Y., & Cui, Y. (2022). Onboard early detection and mitigation of lithium plating in fast-charging batteries. Nature Communications, 13(1), 文章 7091. https://doi.org/10.1038/s41467-022-33486-4
Huang, Wenxiao ; Ye, Yusheng ; Chen, Hao 等. / Onboard early detection and mitigation of lithium plating in fast-charging batteries. 在: Nature Communications. 2022 ; 卷 13, 号码 1.
@article{de126b5656e947b3b246e78f4721b51d,
title = "Onboard early detection and mitigation of lithium plating in fast-charging batteries",
abstract = "Fast-charging is considered as one of the most desired features needed for lithium-ion batteries to accelerate the mainstream adoption of electric vehicles. However, current battery charging protocols mainly consist of conservative rate steps to avoid potential hazardous lithium plating and its associated parasitic reactions. A highly sensitive onboard detection method could enable battery fast-charging without reaching the lithium plating regime. Here, we demonstrate a novel differential pressure sensing method to precisely detect the lithium plating event. By measuring the real-time change of cell pressure per unit of charge (dP/dQ) and comparing it with the threshold defined by the maximum of dP/dQ during lithium-ion intercalation into the negative electrode, the onset of lithium plating before its extensive growth can be detected with high precision. In addition, we show that by integrating this differential pressure sensing into the battery management system (BMS), a dynamic self-regulated charging protocol can be realized to effectively extinguish the lithium plating triggered by low temperature (0 °C) while the conventional static charging protocol leads to catastrophic lithium plating at the same condition. We propose that differential pressure sensing could serve as an early nondestructive diagnosis method to guide the development of fast-charging battery technologies.",
author = "Wenxiao Huang and Yusheng Ye and Hao Chen and Vil{\'a}, {Rafael A.} and Andrew Xiang and Hongxia Wang and Fang Liu and Zhiao Yu and Jinwei Xu and Zewen Zhang and Rong Xu and Yecun Wu and Chou, {Lien Yang} and Hansen Wang and Junwei Xu and Boyle, {David Tomas} and Yuzhang Li and Yi Cui",
note = "Publisher Copyright: {\textcopyright} 2022, The Author(s).",
year = "2022",
month = dec,
doi = "10.1038/s41467-022-33486-4",
language = "English",
volume = "13",
journal = "Nature Communications",
issn = "2041-1723",
publisher = "Nature Publishing Group",
number = "1",
}
Huang, W, Ye, Y, Chen, H, Vilá, RA, Xiang, A, Wang, H, Liu, F, Yu, Z, Xu, J, Zhang, Z, Xu, R, Wu, Y, Chou, LY, Wang, H, Xu, J, Boyle, DT, Li, Y & Cui, Y 2022, 'Onboard early detection and mitigation of lithium plating in fast-charging batteries', Nature Communications, 卷 13, 号码 1, 7091. https://doi.org/10.1038/s41467-022-33486-4
Onboard early detection and mitigation of lithium plating in fast-charging batteries. / Huang, Wenxiao
; Ye, Yusheng; Chen, Hao 等.
在:
Nature Communications, 卷 13, 号码 1, 7091, 12.2022.
科研成果: 期刊稿件 › 文章 › 同行评审
TY - JOUR
T1 - Onboard early detection and mitigation of lithium plating in fast-charging batteries
AU - Huang, Wenxiao
AU - Ye, Yusheng
AU - Chen, Hao
AU - Vilá, Rafael A.
AU - Xiang, Andrew
AU - Wang, Hongxia
AU - Liu, Fang
AU - Yu, Zhiao
AU - Xu, Jinwei
AU - Zhang, Zewen
AU - Xu, Rong
AU - Wu, Yecun
AU - Chou, Lien Yang
AU - Wang, Hansen
AU - Xu, Junwei
AU - Boyle, David Tomas
AU - Li, Yuzhang
AU - Cui, Yi
N1 - Publisher Copyright:
© 2022, The Author(s).
PY - 2022/12
Y1 - 2022/12
N2 - Fast-charging is considered as one of the most desired features needed for lithium-ion batteries to accelerate the mainstream adoption of electric vehicles. However, current battery charging protocols mainly consist of conservative rate steps to avoid potential hazardous lithium plating and its associated parasitic reactions. A highly sensitive onboard detection method could enable battery fast-charging without reaching the lithium plating regime. Here, we demonstrate a novel differential pressure sensing method to precisely detect the lithium plating event. By measuring the real-time change of cell pressure per unit of charge (dP/dQ) and comparing it with the threshold defined by the maximum of dP/dQ during lithium-ion intercalation into the negative electrode, the onset of lithium plating before its extensive growth can be detected with high precision. In addition, we show that by integrating this differential pressure sensing into the battery management system (BMS), a dynamic self-regulated charging protocol can be realized to effectively extinguish the lithium plating triggered by low temperature (0 °C) while the conventional static charging protocol leads to catastrophic lithium plating at the same condition. We propose that differential pressure sensing could serve as an early nondestructive diagnosis method to guide the development of fast-charging battery technologies.
AB - Fast-charging is considered as one of the most desired features needed for lithium-ion batteries to accelerate the mainstream adoption of electric vehicles. However, current battery charging protocols mainly consist of conservative rate steps to avoid potential hazardous lithium plating and its associated parasitic reactions. A highly sensitive onboard detection method could enable battery fast-charging without reaching the lithium plating regime. Here, we demonstrate a novel differential pressure sensing method to precisely detect the lithium plating event. By measuring the real-time change of cell pressure per unit of charge (dP/dQ) and comparing it with the threshold defined by the maximum of dP/dQ during lithium-ion intercalation into the negative electrode, the onset of lithium plating before its extensive growth can be detected with high precision. In addition, we show that by integrating this differential pressure sensing into the battery management system (BMS), a dynamic self-regulated charging protocol can be realized to effectively extinguish the lithium plating triggered by low temperature (0 °C) while the conventional static charging protocol leads to catastrophic lithium plating at the same condition. We propose that differential pressure sensing could serve as an early nondestructive diagnosis method to guide the development of fast-charging battery technologies.
UR - http://www.scopus.com/inward/record.url?scp=85142276014&partnerID=8YFLogxK
U2 - 10.1038/s41467-022-33486-4
DO - 10.1038/s41467-022-33486-4
M3 - Article
C2 - 36402759
AN - SCOPUS:85142276014
SN - 2041-1723
VL - 13
JO - Nature Communications
JF - Nature Communications
IS - 1
M1 - 7091
ER -
Huang W, Ye Y, Chen H, Vilá RA, Xiang A, Wang H 等. Onboard early detection and mitigation of lithium plating in fast-charging batteries. Nature Communications. 2022 12月;13(1):7091. doi: 10.1038/s41467-022-33486-4
