Numerical simulation and optimization design for an end cap structure of an electromechanical system

Lang Wang; Jingying Zhang; Qiong Fan; Tao Jia

doi:10.1109/ITEC-AP.2014.6940994

Numerical simulation and optimization design for an end cap structure of an electromechanical system

Lang Wang, Jingying Zhang, Qiong Fan, Tao Jia

外国语学院

Beijing Institute of Technology

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

摘要

The end cap of an electromechanical system deforms severely when it is under extreme pressure load condition. To solve the problem, numerical simulation method is used. Finite element modeling is established. Take the minimum compliance of the model as the design objective. An optimized model is put forward by optimizing the structure. The results of calculation indicate that the largest deformation decreases and the stiffness of the whole structure is improved. For the initial phase of the project design, it has a very important significance for improving the design quality, speeding up the design process, and saving materials.

源语言	英语
主期刊名	IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings
出版商	Institute of Electrical and Electronics Engineers Inc.
ISBN（电子版）	9781479942398
DOI	https://doi.org/10.1109/ITEC-AP.2014.6940994
出版状态	已出版 - 30 10月 2014
活动	2014 IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Beijing, 中国期限: 31 8月 2014 → 3 9月 2014

出版系列

姓名	IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings

会议

会议	2014 IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014
国家/地区	中国
市	Beijing
时期	31/08/14 → 3/09/14

访问文件

10.1109/ITEC-AP.2014.6940994

其它文件与链接

链接到 Scopus 的出版物

引用此

Wang, L., Zhang, J., Fan, Q., & Jia, T. (2014). Numerical simulation and optimization design for an end cap structure of an electromechanical system. 在 IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings 文章 6940994 (IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ITEC-AP.2014.6940994

Wang, Lang ; Zhang, Jingying ; Fan, Qiong 等. / Numerical simulation and optimization design for an end cap structure of an electromechanical system. IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 2014. (IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings).

@inproceedings{41139ed3d3ef4c75bf5f4729a1b86192,

title = "Numerical simulation and optimization design for an end cap structure of an electromechanical system",

abstract = "The end cap of an electromechanical system deforms severely when it is under extreme pressure load condition. To solve the problem, numerical simulation method is used. Finite element modeling is established. Take the minimum compliance of the model as the design objective. An optimized model is put forward by optimizing the structure. The results of calculation indicate that the largest deformation decreases and the stiffness of the whole structure is improved. For the initial phase of the project design, it has a very important significance for improving the design quality, speeding up the design process, and saving materials.",

keywords = "deformation, finite element modeling, numerical simulation, optimization design",

author = "Lang Wang and Jingying Zhang and Qiong Fan and Tao Jia",

note = "Publisher Copyright: {\textcopyright} 2014 IEEE.; 2014 IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 ; Conference date: 31-08-2014 Through 03-09-2014",

year = "2014",

month = oct,

day = "30",

doi = "10.1109/ITEC-AP.2014.6940994",

language = "English",

series = "IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings",

address = "United States",

}

Wang, L, Zhang, J, Fan, Q & Jia, T 2014, Numerical simulation and optimization design for an end cap structure of an electromechanical system. 在 IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings., 6940994, IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings, Institute of Electrical and Electronics Engineers Inc., 2014 IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014, Beijing, 中国, 31/08/14. https://doi.org/10.1109/ITEC-AP.2014.6940994

Numerical simulation and optimization design for an end cap structure of an electromechanical system. / Wang, Lang; Zhang, Jingying; Fan, Qiong 等.
IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc., 2014. 6940994 (IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings).

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

TY - GEN

T1 - Numerical simulation and optimization design for an end cap structure of an electromechanical system

AU - Wang, Lang

AU - Zhang, Jingying

AU - Fan, Qiong

AU - Jia, Tao

PY - 2014/10/30

Y1 - 2014/10/30

N2 - The end cap of an electromechanical system deforms severely when it is under extreme pressure load condition. To solve the problem, numerical simulation method is used. Finite element modeling is established. Take the minimum compliance of the model as the design objective. An optimized model is put forward by optimizing the structure. The results of calculation indicate that the largest deformation decreases and the stiffness of the whole structure is improved. For the initial phase of the project design, it has a very important significance for improving the design quality, speeding up the design process, and saving materials.

AB - The end cap of an electromechanical system deforms severely when it is under extreme pressure load condition. To solve the problem, numerical simulation method is used. Finite element modeling is established. Take the minimum compliance of the model as the design objective. An optimized model is put forward by optimizing the structure. The results of calculation indicate that the largest deformation decreases and the stiffness of the whole structure is improved. For the initial phase of the project design, it has a very important significance for improving the design quality, speeding up the design process, and saving materials.

KW - deformation

KW - finite element modeling

KW - numerical simulation

KW - optimization design

UR - http://www.scopus.com/inward/record.url?scp=84916217974&partnerID=8YFLogxK

U2 - 10.1109/ITEC-AP.2014.6940994

DO - 10.1109/ITEC-AP.2014.6940994

M3 - Conference contribution

AN - SCOPUS:84916217974

T3 - IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings

BT - IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2014 IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014

Y2 - 31 August 2014 through 3 September 2014

ER -

Wang L, Zhang J, Fan Q, Jia T. Numerical simulation and optimization design for an end cap structure of an electromechanical system. 在 IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings. Institute of Electrical and Electronics Engineers Inc. 2014. 6940994. (IEEE Transportation Electrification Conference and Expo, ITEC Asia-Pacific 2014 - Conference Proceedings). doi: 10.1109/ITEC-AP.2014.6940994

Numerical simulation and optimization design for an end cap structure of an electromechanical system

摘要

出版系列

会议

访问文件

其它文件与链接

指纹

引用此