TY - JOUR
T1 - Noise optimization of a regenerative automotive fuel pump
AU - Wang, J. F.
AU - Feng, H. H.
AU - Mou, X. L.
AU - Huang, Y. X.
N1 - Publisher Copyright:
© Published under licence by IOP Publishing Ltd.
PY - 2017/3/23
Y1 - 2017/3/23
N2 - The regenerative pump used in automotive is facing a noise problem. To understand the mechanism in detail, Computational Fluid Dynamics (CFD) and Computational Acoustic Analysis (CAA) together were used to understand the fluid and acoustic characteristics of the fuel pump using ANSYS-CFX 15.0 and LMS Virtual. Lab Rev12, respectively. The CFD model and acoustical model were validated by mass flow rate test and sound pressure test, respectively. Comparing the computational and experimental results shows that sound pressure levels at the observer position are consistent at high frequencies, especially at blade passing frequency. After validating the models, several numerical models were analyzed in the study for noise improvement. It is observed that for configuration having greater number of impeller blades, noise level was significantly improved at blade passing frequency, when compared to that of the original model.
AB - The regenerative pump used in automotive is facing a noise problem. To understand the mechanism in detail, Computational Fluid Dynamics (CFD) and Computational Acoustic Analysis (CAA) together were used to understand the fluid and acoustic characteristics of the fuel pump using ANSYS-CFX 15.0 and LMS Virtual. Lab Rev12, respectively. The CFD model and acoustical model were validated by mass flow rate test and sound pressure test, respectively. Comparing the computational and experimental results shows that sound pressure levels at the observer position are consistent at high frequencies, especially at blade passing frequency. After validating the models, several numerical models were analyzed in the study for noise improvement. It is observed that for configuration having greater number of impeller blades, noise level was significantly improved at blade passing frequency, when compared to that of the original model.
UR - http://www.scopus.com/inward/record.url?scp=85017474511&partnerID=8YFLogxK
U2 - 10.1088/1757-899X/187/1/012035
DO - 10.1088/1757-899X/187/1/012035
M3 - Conference article
AN - SCOPUS:85017474511
SN - 1757-8981
VL - 187
JO - IOP Conference Series: Materials Science and Engineering
JF - IOP Conference Series: Materials Science and Engineering
IS - 1
M1 - 012035
T2 - 2016 2nd International Conference on Mechanical and Aeronautical Engineering, ICMAE 2016
Y2 - 28 December 2016 through 30 December 2016
ER -