Injection mould design for toy helicopter

Jun Rong; Ruijun Wang; Yichun Wang; Zhanchun Duan; Yingjun Yang

doi:10.1109/MAEE.2013.51

Injection mould design for toy helicopter

Jun Rong, Ruijun Wang, Yichun Wang, Zhanchun Duan, Yingjun Yang

机械与车辆学院

Beijing Institute of Technology

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

摘要

Through particular analysis of manufacturability for toy helicopter, this paper presents the main technical process of injection mould design and manufacturing. The best kind and position of gate is discussed, the Harvard structure and side parting core-pulling structure guided by angle pins are adopted, and the problem of plastic parts demoulding after moulding is perfectly solved. The whole mould structure is designed and the working procedure of the injection mould is stated.

源语言	英语
主期刊名	Proceedings - 2013 International Conference on Mechanical and Automation Engineering, MAEE 2013
页	172-175
页数	4
DOI	https://doi.org/10.1109/MAEE.2013.51
出版状态	已出版 - 2013
活动	2013 International Conference on Mechanical and Automation Engineering, MAEE 2013 - Jiujang, 中国期限: 21 7月 2013 → 23 7月 2013

出版系列

姓名	Proceedings - 2013 International Conference on Mechanical and Automation Engineering, MAEE 2013

会议

会议	2013 International Conference on Mechanical and Automation Engineering, MAEE 2013
国家/地区	中国
市	Jiujang
时期	21/07/13 → 23/07/13

访问文件

10.1109/MAEE.2013.51

其它文件与链接

链接到 Scopus 的出版物

引用此

Rong, J., Wang, R., Wang, Y., Duan, Z., & Yang, Y. (2013). Injection mould design for toy helicopter. 在 Proceedings - 2013 International Conference on Mechanical and Automation Engineering, MAEE 2013 (页码 172-175). 文章 6602164 (Proceedings - 2013 International Conference on Mechanical and Automation Engineering, MAEE 2013). https://doi.org/10.1109/MAEE.2013.51

@inproceedings{bce2e92109784d48a08386d462c376ed,

title = "Injection mould design for toy helicopter",

abstract = "Through particular analysis of manufacturability for toy helicopter, this paper presents the main technical process of injection mould design and manufacturing. The best kind and position of gate is discussed, the Harvard structure and side parting core-pulling structure guided by angle pins are adopted, and the problem of plastic parts demoulding after moulding is perfectly solved. The whole mould structure is designed and the working procedure of the injection mould is stated.",

keywords = "Harvard structure, Pin gate, Plastic injection mould, Toy helicopter",

author = "Jun Rong and Ruijun Wang and Yichun Wang and Zhanchun Duan and Yingjun Yang",

year = "2013",

doi = "10.1109/MAEE.2013.51",

language = "English",

isbn = "9780769549750",

series = "Proceedings - 2013 International Conference on Mechanical and Automation Engineering, MAEE 2013",

pages = "172--175",

booktitle = "Proceedings - 2013 International Conference on Mechanical and Automation Engineering, MAEE 2013",

note = "2013 International Conference on Mechanical and Automation Engineering, MAEE 2013 ; Conference date: 21-07-2013 Through 23-07-2013",

}

Rong, J, Wang, R, Wang, Y, Duan, Z & Yang, Y 2013, Injection mould design for toy helicopter. 在 Proceedings - 2013 International Conference on Mechanical and Automation Engineering, MAEE 2013., 6602164, Proceedings - 2013 International Conference on Mechanical and Automation Engineering, MAEE 2013, 页码 172-175, 2013 International Conference on Mechanical and Automation Engineering, MAEE 2013, Jiujang, 中国, 21/07/13. https://doi.org/10.1109/MAEE.2013.51

Injection mould design for toy helicopter. / Rong, Jun; Wang, Ruijun; Wang, Yichun 等.
Proceedings - 2013 International Conference on Mechanical and Automation Engineering, MAEE 2013. 2013. 页码 172-175 6602164 (Proceedings - 2013 International Conference on Mechanical and Automation Engineering, MAEE 2013).

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

TY - GEN

T1 - Injection mould design for toy helicopter

AU - Rong, Jun

AU - Wang, Ruijun

AU - Wang, Yichun

AU - Duan, Zhanchun

AU - Yang, Yingjun

PY - 2013

Y1 - 2013

N2 - Through particular analysis of manufacturability for toy helicopter, this paper presents the main technical process of injection mould design and manufacturing. The best kind and position of gate is discussed, the Harvard structure and side parting core-pulling structure guided by angle pins are adopted, and the problem of plastic parts demoulding after moulding is perfectly solved. The whole mould structure is designed and the working procedure of the injection mould is stated.

AB - Through particular analysis of manufacturability for toy helicopter, this paper presents the main technical process of injection mould design and manufacturing. The best kind and position of gate is discussed, the Harvard structure and side parting core-pulling structure guided by angle pins are adopted, and the problem of plastic parts demoulding after moulding is perfectly solved. The whole mould structure is designed and the working procedure of the injection mould is stated.

KW - Harvard structure

KW - Pin gate

KW - Plastic injection mould

KW - Toy helicopter

UR - http://www.scopus.com/inward/record.url?scp=84885412471&partnerID=8YFLogxK

U2 - 10.1109/MAEE.2013.51

DO - 10.1109/MAEE.2013.51

M3 - Conference contribution

AN - SCOPUS:84885412471

SN - 9780769549750

T3 - Proceedings - 2013 International Conference on Mechanical and Automation Engineering, MAEE 2013

SP - 172

EP - 175

BT - Proceedings - 2013 International Conference on Mechanical and Automation Engineering, MAEE 2013

T2 - 2013 International Conference on Mechanical and Automation Engineering, MAEE 2013

Y2 - 21 July 2013 through 23 July 2013

ER -

Injection mould design for toy helicopter

摘要

出版系列

会议

访问文件

其它文件与链接

指纹

引用此