FEM analysis of the mold influence on curing deformation of stiffened composite panel in the out-of-autoclave process

Linxin Liu; Jingjie Cong; Kai Liu; Bangke Meng; Boming Zhang

doi:10.13801/j.cnki.fhclxb.20170412.005

FEM analysis of the mold influence on curing deformation of stiffened composite panel in the out-of-autoclave process

Linxin Liu, Jingjie Cong, Kai Liu, Bangke Meng, Boming Zhang^*

^*此作品的通讯作者

科研成果: 期刊稿件 › 文章 › 同行评审

摘要

By using vacuum bag molding process, T-shaped stiffened carbon fiber reinforced resin composite panel was prepared with CYCOM 5320-1 prepreg. Then the curing deformation was measured by laser tracer. The simulation of curing process of the panel with and without mold considered was launched by finite element method. The results of the simulation show that the simulation and test have the same deformation tendency, and the deformation fits well along the width direction. It is more close to the true values when considering the mold factor. It is because that before resin reaches gel point, the mold is heated and squeezes die cavity, which causes permanent deformation of the component.

源语言	英语
页（从-至）	347-355
页数	9
期刊	Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica
卷	35
期	2
DOI	https://doi.org/10.13801/j.cnki.fhclxb.20170412.005
出版状态	已出版 - 1 2月 2018
已对外发布	是

访问文件

10.13801/j.cnki.fhclxb.20170412.005

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{88ba8522c6d04743a4a3de888575aaf4,

title = "FEM analysis of the mold influence on curing deformation of stiffened composite panel in the out-of-autoclave process",

abstract = "By using vacuum bag molding process, T-shaped stiffened carbon fiber reinforced resin composite panel was prepared with CYCOM 5320-1 prepreg. Then the curing deformation was measured by laser tracer. The simulation of curing process of the panel with and without mold considered was launched by finite element method. The results of the simulation show that the simulation and test have the same deformation tendency, and the deformation fits well along the width direction. It is more close to the true values when considering the mold factor. It is because that before resin reaches gel point, the mold is heated and squeezes die cavity, which causes permanent deformation of the component.",

keywords = "Composite, Curing deformation, Finite element analysis, Mold, Stiffened panel",

author = "Linxin Liu and Jingjie Cong and Kai Liu and Bangke Meng and Boming Zhang",

year = "2018",

month = feb,

day = "1",

doi = "10.13801/j.cnki.fhclxb.20170412.005",

language = "English",

volume = "35",

pages = "347--355",

journal = "Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica",

issn = "1000-3851",

publisher = "Beijing University of Aeronautics and Astronautics (BUAA)",

number = "2",

}

TY - JOUR

T1 - FEM analysis of the mold influence on curing deformation of stiffened composite panel in the out-of-autoclave process

AU - Liu, Linxin

AU - Cong, Jingjie

AU - Liu, Kai

AU - Meng, Bangke

AU - Zhang, Boming

PY - 2018/2/1

Y1 - 2018/2/1

N2 - By using vacuum bag molding process, T-shaped stiffened carbon fiber reinforced resin composite panel was prepared with CYCOM 5320-1 prepreg. Then the curing deformation was measured by laser tracer. The simulation of curing process of the panel with and without mold considered was launched by finite element method. The results of the simulation show that the simulation and test have the same deformation tendency, and the deformation fits well along the width direction. It is more close to the true values when considering the mold factor. It is because that before resin reaches gel point, the mold is heated and squeezes die cavity, which causes permanent deformation of the component.

AB - By using vacuum bag molding process, T-shaped stiffened carbon fiber reinforced resin composite panel was prepared with CYCOM 5320-1 prepreg. Then the curing deformation was measured by laser tracer. The simulation of curing process of the panel with and without mold considered was launched by finite element method. The results of the simulation show that the simulation and test have the same deformation tendency, and the deformation fits well along the width direction. It is more close to the true values when considering the mold factor. It is because that before resin reaches gel point, the mold is heated and squeezes die cavity, which causes permanent deformation of the component.

KW - Composite

KW - Curing deformation

KW - Finite element analysis

KW - Mold

KW - Stiffened panel

UR - http://www.scopus.com/inward/record.url?scp=85048558892&partnerID=8YFLogxK

U2 - 10.13801/j.cnki.fhclxb.20170412.005

DO - 10.13801/j.cnki.fhclxb.20170412.005

M3 - Article

AN - SCOPUS:85048558892

SN - 1000-3851

VL - 35

SP - 347

EP - 355

JO - Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica

JF - Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica

IS - 2

ER -

FEM analysis of the mold influence on curing deformation of stiffened composite panel in the out-of-autoclave process

摘要

访问文件

其它文件与链接

指纹

引用此