TY - JOUR
T1 - Experimental and numerical investigation of low melting point metal based PCM heat sink with internal fins
AU - Yang, Xiao Hu
AU - Tan, Si Cong
AU - Ding, Yu Jie
AU - Wang, Lei
AU - Liu, Jing
AU - Zhou, Yi Xin
N1 - Publisher Copyright:
© 2017 Elsevier Ltd
PY - 2017/10
Y1 - 2017/10
N2 - In this paper, low melting point metal (LMPM), eutectic alloy Bi31.6In48.8Sn19.6 (E-BiInSn), was adopted as phase change material for potential thermal management applications. First, E-BiInSn was prepared and its main thermophysical properties were characterized. Then, transient thermal performances of E-BiInSn based heat sinks with internal crossed fins were tested, in comparison with that of organic PCM (octadecanol) which has close melting point. Three types of heat sink structures which have different number of internal fins were studied. Three heating conditions were applied, namely 80 W (2.2 W/cm2), 200 W (5.6 W/cm2) and 320 W (8.9 W/cm2). For all of the cases, E-BiInSn exhibited much superior thermal performance than that of octadecanol. Furthermore, cyclic test of the E-BiInSn heat sink was carried out, which showed good repeatability and stability, and without supercooling. Finally, a simplified 3D conjugate numerical model was developed to simulate the melting process of LMPM heat sink, which showed good agreement with the experimental results. This simplified model would be much useful in practical thermal design and optimization of LMPM heat sink, for that it would significantly save the computational time consumption.
AB - In this paper, low melting point metal (LMPM), eutectic alloy Bi31.6In48.8Sn19.6 (E-BiInSn), was adopted as phase change material for potential thermal management applications. First, E-BiInSn was prepared and its main thermophysical properties were characterized. Then, transient thermal performances of E-BiInSn based heat sinks with internal crossed fins were tested, in comparison with that of organic PCM (octadecanol) which has close melting point. Three types of heat sink structures which have different number of internal fins were studied. Three heating conditions were applied, namely 80 W (2.2 W/cm2), 200 W (5.6 W/cm2) and 320 W (8.9 W/cm2). For all of the cases, E-BiInSn exhibited much superior thermal performance than that of octadecanol. Furthermore, cyclic test of the E-BiInSn heat sink was carried out, which showed good repeatability and stability, and without supercooling. Finally, a simplified 3D conjugate numerical model was developed to simulate the melting process of LMPM heat sink, which showed good agreement with the experimental results. This simplified model would be much useful in practical thermal design and optimization of LMPM heat sink, for that it would significantly save the computational time consumption.
KW - Heat sink
KW - Low melting point metal
KW - Numerical model
KW - Phase change material
KW - Thermal energy storage
KW - Thermal management
UR - http://www.scopus.com/inward/record.url?scp=85026657293&partnerID=8YFLogxK
U2 - 10.1016/j.icheatmasstransfer.2017.07.001
DO - 10.1016/j.icheatmasstransfer.2017.07.001
M3 - Article
AN - SCOPUS:85026657293
SN - 0735-1933
VL - 87
SP - 118
EP - 124
JO - International Communications in Heat and Mass Transfer
JF - International Communications in Heat and Mass Transfer
ER -