Effects of transient slamming and harmonic swings on the marine compound NC machine tool

Yewang Sun*, Zhijing Zhang, Jiaying Zhang, Xin Jin, Binshi Xu, Yongjun Deng, Gang Zhao

*此作品的通讯作者

科研成果: 期刊稿件文章同行评审

3 引用 (Scopus)

摘要

To study structural seakeeping stability of the marine compound NC machine tool in the ship environment, this research analyses the effects of extreme wave loads including transient slamming and harmonic swings on the machine tool, and the coupling methods of transient reaction, static structural analysis and harmonic response are used to solve the problems. The results show that the major guide pairs of the column are the weakest parts in the machine tool in a ship environment, so the column working deflection angle of the machine tool should be consistent with the ship heading angle to reduce influence of wave loads on dynamic stability of the machine. The data indicate that the minimum safety factor is 3.43 under an extreme surge acceleration of 41.8 m/s2, and the normal safety factor of 3.0 shows that the guide pairs are able to endure extreme slamming wave loads of H1/3=7.6 m at the maximum velocity of the ship. In addition, the machine tool has a maximum deformation of 0.032 mm and a peak stress of 5.07 MPa under extreme harmonic wave excitation. Importantly, the machine's cutting accuracy was suitable for the rapid manufacturing requirement to maintain a ship's broken components.

源语言英语
页(从-至)606-619
页数14
期刊Ocean Engineering
108
DOI
出版状态已出版 - 1 11月 2015

指纹

探究 'Effects of transient slamming and harmonic swings on the marine compound NC machine tool' 的科研主题。它们共同构成独一无二的指纹。

引用此