TY - GEN
T1 - Controlled Fabrication of Micro-Chain Robot Using Magnetically Guided Arraying Microfluidic Devices
AU - Tang, Xiaoqing
AU - Liu, Xiaoming
AU - Li, Yuyang
AU - Liu, Dan
AU - Li, Yuke
AU - Kojima, Masaru
AU - Huang, Qiang
AU - Arai, Tatsuo
N1 - Publisher Copyright:
© 2022 IEEE.
PY - 2022
Y1 - 2022
N2 - The magnetic microrobot has become a promising approach in many biomedical applications due to its small volume, flexible motion, and untethered micromachines. The micro-chain robot is one of the most popular magnetic microrobots. However, the uncontrollable magnetic moment direction and quantity of the magnetic beads consisted in the existing self-assembled micro-chain robot limit their locomotion and applications. This paper proposed an on-chip micro-chain robot fabrication method to assemble the magnetic beads with controllable magnetic moment direction and quantity. The bead quantity can be controlled by the structure limits of the microchannel, and the direction of the magnetic moment can be adj usted by the integrated external magnetic field. The assembled magnetic beads are then glued by the hydrogel under UV exposure. The micro-chain robots with different quantities and magnetic moment directions of the magnetic beads were successfully fabricated and tested in experiments. Due to the array structure of the microfluidic device, batch manufacturing of low-cost magnetic robots was achieved in our method. The movement of dual-bead microrobots with two orthogonal magnetic moment directions was analyzed and compared. One of the dual-bead microrobots was applied in the transportation of the hydrogel module using pushing and pulling modes. It indicated that the proposed controllable on-chip fabrication of the magnetic micro-chain robots has the potential to enhance the microrobot ability in biomedical applications.
AB - The magnetic microrobot has become a promising approach in many biomedical applications due to its small volume, flexible motion, and untethered micromachines. The micro-chain robot is one of the most popular magnetic microrobots. However, the uncontrollable magnetic moment direction and quantity of the magnetic beads consisted in the existing self-assembled micro-chain robot limit their locomotion and applications. This paper proposed an on-chip micro-chain robot fabrication method to assemble the magnetic beads with controllable magnetic moment direction and quantity. The bead quantity can be controlled by the structure limits of the microchannel, and the direction of the magnetic moment can be adj usted by the integrated external magnetic field. The assembled magnetic beads are then glued by the hydrogel under UV exposure. The micro-chain robots with different quantities and magnetic moment directions of the magnetic beads were successfully fabricated and tested in experiments. Due to the array structure of the microfluidic device, batch manufacturing of low-cost magnetic robots was achieved in our method. The movement of dual-bead microrobots with two orthogonal magnetic moment directions was analyzed and compared. One of the dual-bead microrobots was applied in the transportation of the hydrogel module using pushing and pulling modes. It indicated that the proposed controllable on-chip fabrication of the magnetic micro-chain robots has the potential to enhance the microrobot ability in biomedical applications.
UR - http://www.scopus.com/inward/record.url?scp=85146313883&partnerID=8YFLogxK
U2 - 10.1109/IROS47612.2022.9981455
DO - 10.1109/IROS47612.2022.9981455
M3 - Conference contribution
AN - SCOPUS:85146313883
T3 - IEEE International Conference on Intelligent Robots and Systems
SP - 1090
EP - 1095
BT - IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2022
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 2022 IEEE/RSJ International Conference on Intelligent Robots and Systems, IROS 2022
Y2 - 23 October 2022 through 27 October 2022
ER -