Auto-ignition characteristics of diesel fuel in an O2-CO2 mixture

Yongfeng Liu, Tianpeng Zhao, Zhijun Li*, Fang Wang, Shengzhuo Yao, Xingyu Liang, Xu He

*此作品的通讯作者

科研成果: 期刊稿件文章同行评审

2 引用 (Scopus)

摘要

To study diesel fuel auto-ignition in an O2-CO2 mixture, a TZ (temperature zone) model is proposed. The effect of O2 and CO2 on reaction rate is considered. The relationship between temperature and ignition delay time is obtained. Different reduced mechanisms based on steady-state assumptions are applied in three temperature zones (T ≤ 800 K, 800 K < T ≤ 1100 K, T > 1100 K). The TZ model is coupled to KIVA-3V code for simulation calculations. To support the simulations, a constant-volume combustion bomb test bench is set up to visualize diesel fuel auto-ignition in air (21%O2-79%N2), a 53%O2-47%CO2 mixture, and a 61%O2-39%CO2 mixture. Ignition delay time and the flame image in these three conditions are compared and analyzed. Then the flame temperature contour and the flame lift-off length in a 53%O2-47%CO2 mixture and a 61%O2-39%CO2 mixture are analyzed. The results show that diesel fuel auto-ignition can be achieved in the tested O2-CO2 mixture. The TZ model can predict the auto-ignition characteristics of diesel fuel in a 53%O2-47%CO2 mixture and a 61%O2-39%CO2, with errors of 12% and 10%, respectively. In these two conditions, the ignition delay time and flame lift-off length are shorter than they are in air.

源语言英语
页(从-至)1-12
页数12
期刊Transactions of the Canadian Society for Mechanical Engineering
43
1
DOI
出版状态已出版 - 2019

指纹

探究 'Auto-ignition characteristics of diesel fuel in an O2-CO2 mixture' 的科研主题。它们共同构成独一无二的指纹。

引用此