Analysis of the Performance of Aerial Work Platform Working Device Based on Virtual Prototype and Finite Element Method

Jinquan Guo; Hongwen He; Chao Sun

doi:10.1016/j.egypro.2016.12.096

Analysis of the Performance of Aerial Work Platform Working Device Based on Virtual Prototype and Finite Element Method

Jinquan Guo, Hongwen He^*, Chao Sun

^*此作品的通讯作者

机械与车辆学院

Beijing Institute of Technology

科研成果: 期刊稿件 › 会议文章 › 同行评审

8 引用（Scopus）

摘要

In this paper, a model of aerial work platform working device based on virtual prototype and finite element method was established. Through the software ADAMS kinematic simulation, we got the moving velocity and acceleration. The moving velocity and acceleration showed that the aerial work platform working device met the standards of the national safety standard. Through the dynamics simulation, we got the joints force between working device, we input the joints force into the finite element model established by the software of Hyperworks. The simulation result of working device stress distribution showed that the chose material met the working requirements; the structural design of working device was reasonable.

源语言	英语
页（从-至）	568-573
页数	6
期刊	Energy Procedia
卷	104
DOI	https://doi.org/10.1016/j.egypro.2016.12.096
出版状态	已出版 - 2016
活动	Applied Energy Symposium and Forum: Low - Carbon Cities and Urban Energy Systems, CUE 2016 - Jinan, 中国期限: 13 6月 2016 → 15 6月 2016

访问文件

10.1016/j.egypro.2016.12.096

其它文件与链接

链接到 Scopus 的出版物

引用此

@article{9c70c74c5adc431db970f9c3a50d128b,

title = "Analysis of the Performance of Aerial Work Platform Working Device Based on Virtual Prototype and Finite Element Method",

abstract = "In this paper, a model of aerial work platform working device based on virtual prototype and finite element method was established. Through the software ADAMS kinematic simulation, we got the moving velocity and acceleration. The moving velocity and acceleration showed that the aerial work platform working device met the standards of the national safety standard. Through the dynamics simulation, we got the joints force between working device, we input the joints force into the finite element model established by the software of Hyperworks. The simulation result of working device stress distribution showed that the chose material met the working requirements; the structural design of working device was reasonable.",

keywords = "aerial work platform, finite element, strength, virtual prototype, working device",

author = "Jinquan Guo and Hongwen He and Chao Sun",

note = "Publisher Copyright: {\textcopyright} 2016 The Authors. Published by Elsevier Ltd.; Applied Energy Symposium and Forum: Low - Carbon Cities and Urban Energy Systems, CUE 2016 ; Conference date: 13-06-2016 Through 15-06-2016",

year = "2016",

doi = "10.1016/j.egypro.2016.12.096",

language = "English",

volume = "104",

pages = "568--573",

journal = "Energy Procedia",

issn = "1876-6102",

publisher = "Elsevier B.V.",

}

TY - JOUR

T1 - Analysis of the Performance of Aerial Work Platform Working Device Based on Virtual Prototype and Finite Element Method

AU - Guo, Jinquan

AU - He, Hongwen

AU - Sun, Chao

PY - 2016

Y1 - 2016

N2 - In this paper, a model of aerial work platform working device based on virtual prototype and finite element method was established. Through the software ADAMS kinematic simulation, we got the moving velocity and acceleration. The moving velocity and acceleration showed that the aerial work platform working device met the standards of the national safety standard. Through the dynamics simulation, we got the joints force between working device, we input the joints force into the finite element model established by the software of Hyperworks. The simulation result of working device stress distribution showed that the chose material met the working requirements; the structural design of working device was reasonable.

AB - In this paper, a model of aerial work platform working device based on virtual prototype and finite element method was established. Through the software ADAMS kinematic simulation, we got the moving velocity and acceleration. The moving velocity and acceleration showed that the aerial work platform working device met the standards of the national safety standard. Through the dynamics simulation, we got the joints force between working device, we input the joints force into the finite element model established by the software of Hyperworks. The simulation result of working device stress distribution showed that the chose material met the working requirements; the structural design of working device was reasonable.

KW - aerial work platform

KW - finite element

KW - strength

KW - virtual prototype

KW - working device

UR - http://www.scopus.com/inward/record.url?scp=85013124637&partnerID=8YFLogxK

U2 - 10.1016/j.egypro.2016.12.096

DO - 10.1016/j.egypro.2016.12.096

M3 - Conference article

AN - SCOPUS:85013124637

SN - 1876-6102

VL - 104

SP - 568

EP - 573

JO - Energy Procedia

JF - Energy Procedia

T2 - Applied Energy Symposium and Forum: Low - Carbon Cities and Urban Energy Systems, CUE 2016

Y2 - 13 June 2016 through 15 June 2016

ER -

Analysis of the Performance of Aerial Work Platform Working Device Based on Virtual Prototype and Finite Element Method

摘要

访问文件

其它文件与链接

指纹

引用此