Abstract
Resonant rotational scanning micromirrors with electrostatic comb-drive actuators are widely used in generating structured lights for 3D sensing, but their resonant scanning stability is affected considerably by the working temperature, which in turn compromises the sensing accuracy. The resonant scanning instability is mainly exhibited as the temperature drifts of the quality factor (Q) and the resonance frequency. In this paper, we focus on the Q variation due to the temperature dependence of air damping. The temperature dependence of the air damping in a comb-drive micromirror is investigated using both simplified analytical damping models and computational fluidic dynamic (CFD) models. The modeling results show that the temperature dependence of the viscous damping of the comb drive is opposite to that of the drag damping of the mirror plate, providing a means of minimizing the temperature dependence of Q by adjusting the structural parameters of the comb drive and the mirror plate. It has also been found from the modeling that the lengths of the comb-drive fingers and the mirror plate play the most significant role while the cavity height under the mirror plate has little effect if it is more than 10 % of the mirror plate length. Meanwhile, four micromirrors with different comb-finger or mirror-plate lengths are designed and fabricated. The testing results from these four fabricated mirrors have confirmed that the temperature coefficient of the Q value of an angular scanning comb-drive micromirror can be altered and ultimately compensated by changing the mirror-plate and/or comb-finger lengths.
| Original language | English |
|---|---|
| Article number | 112525 |
| Journal | Sensors and Actuators A: Physical |
| Volume | 318 |
| DOIs | |
| Publication status | Published - 1 Feb 2021 |
Keywords
- Air damping
- Electrostatic comb-drive
- MEMS mirror
- Quality factor
- Resonant micromirror
- Temperature dependence