Task-oriented BOM conversion and view mapping

Meng Xiaojun; Zhang Xu; Ning Ruxin; Wang Aimin

doi:10.1109/CSCWD.2010.5471910

Task-oriented BOM conversion and view mapping

Meng Xiaojun^*, Zhang Xu, Ning Ruxin, Wang Aimin

^*Corresponding author for this work

School of Mechanical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Citation (Scopus)

Abstract

To increase the productivity as much as possible and accommodate to the requirements of mass production for the production of multi-variety, multi-type, multi-batch and changeable lot-size, to rapidly respond the urgent task of important production, the technology of task-oriented BOM conversion and view mapping based on UDS (Uniform Data Source) is presented. The method to unify the data source by classifying the parts and collecting the common parts was established. The theory of task-oriented BOM conversion and view mapping is analyzed. The step of implementing task-oriented BOM view mapping is given. Finally, an interpretive, qualitative case was conducted.

Original language	English
Title of host publication	Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010
Pages	565-568
Number of pages	4
DOIs	https://doi.org/10.1109/CSCWD.2010.5471910
Publication status	Published - 2010
Event	2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010 - Shanghai, China Duration: 14 Apr 2010 → 16 Apr 2010

Publication series

Name	Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010

Conference

Conference	2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010
Country/Territory	China
City	Shanghai
Period	14/04/10 → 16/04/10

Keywords

BOM conversion
Bill of materials (BOM)
Uniform Data Source(UDS)
View mapping

Access to Document

10.1109/CSCWD.2010.5471910

Cite this

Xiaojun, M., Xu, Z., Ruxin, N., & Aimin, W. (2010). Task-oriented BOM conversion and view mapping. In Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010 (pp. 565-568). Article 5471910 (Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010). https://doi.org/10.1109/CSCWD.2010.5471910

@inproceedings{d803c091bacd4dd68ec7beb751a5ad0a,

title = "Task-oriented BOM conversion and view mapping",

abstract = "To increase the productivity as much as possible and accommodate to the requirements of mass production for the production of multi-variety, multi-type, multi-batch and changeable lot-size, to rapidly respond the urgent task of important production, the technology of task-oriented BOM conversion and view mapping based on UDS (Uniform Data Source) is presented. The method to unify the data source by classifying the parts and collecting the common parts was established. The theory of task-oriented BOM conversion and view mapping is analyzed. The step of implementing task-oriented BOM view mapping is given. Finally, an interpretive, qualitative case was conducted.",

keywords = "BOM conversion, Bill of materials (BOM), Uniform Data Source(UDS), View mapping",

author = "Meng Xiaojun and Zhang Xu and Ning Ruxin and Wang Aimin",

year = "2010",

doi = "10.1109/CSCWD.2010.5471910",

language = "English",

isbn = "9781424467631",

series = "Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010",

pages = "565--568",

booktitle = "Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010",

note = "2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010 ; Conference date: 14-04-2010 Through 16-04-2010",

}

Xiaojun, M, Xu, Z, Ruxin, N & Aimin, W 2010, Task-oriented BOM conversion and view mapping. in Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010., 5471910, Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010, pp. 565-568, 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010, Shanghai, China, 14/04/10. https://doi.org/10.1109/CSCWD.2010.5471910

Task-oriented BOM conversion and view mapping. / Xiaojun, Meng; Xu, Zhang; Ruxin, Ning et al.
Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010. 2010. p. 565-568 5471910 (Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Task-oriented BOM conversion and view mapping

AU - Xiaojun, Meng

AU - Xu, Zhang

AU - Ruxin, Ning

AU - Aimin, Wang

PY - 2010

Y1 - 2010

N2 - To increase the productivity as much as possible and accommodate to the requirements of mass production for the production of multi-variety, multi-type, multi-batch and changeable lot-size, to rapidly respond the urgent task of important production, the technology of task-oriented BOM conversion and view mapping based on UDS (Uniform Data Source) is presented. The method to unify the data source by classifying the parts and collecting the common parts was established. The theory of task-oriented BOM conversion and view mapping is analyzed. The step of implementing task-oriented BOM view mapping is given. Finally, an interpretive, qualitative case was conducted.

AB - To increase the productivity as much as possible and accommodate to the requirements of mass production for the production of multi-variety, multi-type, multi-batch and changeable lot-size, to rapidly respond the urgent task of important production, the technology of task-oriented BOM conversion and view mapping based on UDS (Uniform Data Source) is presented. The method to unify the data source by classifying the parts and collecting the common parts was established. The theory of task-oriented BOM conversion and view mapping is analyzed. The step of implementing task-oriented BOM view mapping is given. Finally, an interpretive, qualitative case was conducted.

KW - BOM conversion

KW - Bill of materials (BOM)

KW - Uniform Data Source(UDS)

KW - View mapping

UR - http://www.scopus.com/inward/record.url?scp=79953787857&partnerID=8YFLogxK

U2 - 10.1109/CSCWD.2010.5471910

DO - 10.1109/CSCWD.2010.5471910

M3 - Conference contribution

AN - SCOPUS:79953787857

SN - 9781424467631

T3 - Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010

SP - 565

EP - 568

BT - Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010

T2 - 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010

Y2 - 14 April 2010 through 16 April 2010

ER -

Xiaojun M, Xu Z, Ruxin N, Aimin W. Task-oriented BOM conversion and view mapping. In Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010. 2010. p. 565-568. 5471910. (Proceedings of the 2010 14th International Conference on Computer Supported Cooperative Work in Design, CSCWD 2010). doi: 10.1109/CSCWD.2010.5471910

Task-oriented BOM conversion and view mapping

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this