Research on optimizing turbo-matching of a large-displacement PFI hydrogen engine to achieve high-power performance

The output power of hydrogen engines is restricted due to the low volume energy density of hydrogen and lean burn, thus a turbocharger is necessary to boost the power intensity, especially for large-displacement hydrogen engines. However, turbine selection for hydrogen engines is complex comparing gasoline engines because of the different exhaust components and low exhaust temperature. In this research, the turbocharger-matching of a 5.13 L hydrogen engine is studied, and the results show the original turbine, whose maximum reduced mass flow is 0.00966 (kg/s)·Kˆ0.5/kPa, cannot achieve the desired power performance at high speeds. The reduced mass flow rate can be calculated, taking into account the effect that exhausts composition and temperature. The accuracy of the method is validated using data from a 2.3 L turbocharged H2ICE at various engine speeds and throttle openings, and the error between the measured and calculated expansion ratio is less than 5% mostly. At last, a well-matching turbine for high engine speeds of the 5.13 L hydrogen engine to meet the desired power of 120 kW, whose maximum reduced mass flow is extended to 0.0156 (kg/s)·Kˆ0.5/kPa, is selected according to the method, and the maximum power reaches 128.9 kW with a maximum torque of 662.6 N m, improving by 38.7% and 7.7% respectively comparing with the original turbine. However, the output torque reduces by 15.6% at 1200 rpm. The reduced mass flow rate varies significantly in comparison to the turbines that are well suited for low and high engine speeds respectively, thus the Variable Geometry Turbine may be the solution for both low and high speeds simultaneously for hydrogen engines.