Research of relationship between tolerance allocation and machine movement chain

Jiping Lu; Shuiyuan Tang; Guanghe Lu; Hao Song

doi:10.1109/IEEM.2011.6118029

Research of relationship between tolerance allocation and machine movement chain

Jiping Lu^*, Shuiyuan Tang, Guanghe Lu, Hao Song

^*Corresponding author for this work

School of Mechanical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Tolerance allocation is one key to designing and manufacturing of machine equipments. According to the assembly process of tubular-structure, this paper analyzes motion modes to achieve tubular-structure loading. In term of assembly tolerance of tubular-structure, a tolerance model to guide structure design of loading equipment is formulated. Based on tolerance analysis of each motion mode, the maximum available size of the tubular-structure is calculated under different linear rolling guide, and the minimum available size of the interior rail in the box is calculated under different ball screws, trapezoidal screw threads, worm and worm gears. To meet the tolerance of tubular-structure assembly, machine movement chains are defined.

Original language	English
Title of host publication	IEEE International Conference on Industrial Engineering and Engineering Management, IEEM2011
Pages	814-818
Number of pages	5
DOIs	https://doi.org/10.1109/IEEM.2011.6118029
Publication status	Published - 2011
Event	IEEE International Conference on Industrial Engineering and Engineering Management, IEEM2011 - Singapore, Singapore Duration: 6 Dec 2011 → 9 Dec 2011

Publication series

Name	IEEE International Conference on Industrial Engineering and Engineering Management
ISSN (Print)	2157-3611
ISSN (Electronic)	2157-362X

Conference

Conference	IEEE International Conference on Industrial Engineering and Engineering Management, IEEM2011
Country/Territory	Singapore
City	Singapore
Period	6/12/11 → 9/12/11

Keywords

Tolerance allocation
machine movement chain
structure design

Access to Document

10.1109/IEEM.2011.6118029

Cite this

Lu, J., Tang, S., Lu, G., & Song, H. (2011). Research of relationship between tolerance allocation and machine movement chain. In IEEE International Conference on Industrial Engineering and Engineering Management, IEEM2011 (pp. 814-818). Article 6118029 (IEEE International Conference on Industrial Engineering and Engineering Management). https://doi.org/10.1109/IEEM.2011.6118029

@inproceedings{11037b4985b945dead8d5d589a0ef204,

title = "Research of relationship between tolerance allocation and machine movement chain",

abstract = "Tolerance allocation is one key to designing and manufacturing of machine equipments. According to the assembly process of tubular-structure, this paper analyzes motion modes to achieve tubular-structure loading. In term of assembly tolerance of tubular-structure, a tolerance model to guide structure design of loading equipment is formulated. Based on tolerance analysis of each motion mode, the maximum available size of the tubular-structure is calculated under different linear rolling guide, and the minimum available size of the interior rail in the box is calculated under different ball screws, trapezoidal screw threads, worm and worm gears. To meet the tolerance of tubular-structure assembly, machine movement chains are defined.",

keywords = "Tolerance allocation, machine movement chain, structure design",

author = "Jiping Lu and Shuiyuan Tang and Guanghe Lu and Hao Song",

year = "2011",

doi = "10.1109/IEEM.2011.6118029",

language = "English",

isbn = "9781457707391",

series = "IEEE International Conference on Industrial Engineering and Engineering Management",

pages = "814--818",

booktitle = "IEEE International Conference on Industrial Engineering and Engineering Management, IEEM2011",

note = "IEEE International Conference on Industrial Engineering and Engineering Management, IEEM2011 ; Conference date: 06-12-2011 Through 09-12-2011",

}

Lu, J , Tang, S, Lu, G & Song, H 2011, Research of relationship between tolerance allocation and machine movement chain. in IEEE International Conference on Industrial Engineering and Engineering Management, IEEM2011., 6118029, IEEE International Conference on Industrial Engineering and Engineering Management, pp. 814-818, IEEE International Conference on Industrial Engineering and Engineering Management, IEEM2011, Singapore, Singapore, 6/12/11. https://doi.org/10.1109/IEEM.2011.6118029

Research of relationship between tolerance allocation and machine movement chain. / Lu, Jiping ; Tang, Shuiyuan; Lu, Guanghe et al.
IEEE International Conference on Industrial Engineering and Engineering Management, IEEM2011. 2011. p. 814-818 6118029 (IEEE International Conference on Industrial Engineering and Engineering Management).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Research of relationship between tolerance allocation and machine movement chain

AU - Lu, Jiping

AU - Tang, Shuiyuan

AU - Lu, Guanghe

AU - Song, Hao

PY - 2011

Y1 - 2011

N2 - Tolerance allocation is one key to designing and manufacturing of machine equipments. According to the assembly process of tubular-structure, this paper analyzes motion modes to achieve tubular-structure loading. In term of assembly tolerance of tubular-structure, a tolerance model to guide structure design of loading equipment is formulated. Based on tolerance analysis of each motion mode, the maximum available size of the tubular-structure is calculated under different linear rolling guide, and the minimum available size of the interior rail in the box is calculated under different ball screws, trapezoidal screw threads, worm and worm gears. To meet the tolerance of tubular-structure assembly, machine movement chains are defined.

AB - Tolerance allocation is one key to designing and manufacturing of machine equipments. According to the assembly process of tubular-structure, this paper analyzes motion modes to achieve tubular-structure loading. In term of assembly tolerance of tubular-structure, a tolerance model to guide structure design of loading equipment is formulated. Based on tolerance analysis of each motion mode, the maximum available size of the tubular-structure is calculated under different linear rolling guide, and the minimum available size of the interior rail in the box is calculated under different ball screws, trapezoidal screw threads, worm and worm gears. To meet the tolerance of tubular-structure assembly, machine movement chains are defined.

KW - Tolerance allocation

KW - machine movement chain

KW - structure design

UR - http://www.scopus.com/inward/record.url?scp=84863018940&partnerID=8YFLogxK

U2 - 10.1109/IEEM.2011.6118029

DO - 10.1109/IEEM.2011.6118029

M3 - Conference contribution

AN - SCOPUS:84863018940

SN - 9781457707391

T3 - IEEE International Conference on Industrial Engineering and Engineering Management

SP - 814

EP - 818

BT - IEEE International Conference on Industrial Engineering and Engineering Management, IEEM2011

T2 - IEEE International Conference on Industrial Engineering and Engineering Management, IEEM2011

Y2 - 6 December 2011 through 9 December 2011

ER -

Research of relationship between tolerance allocation and machine movement chain

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this