Parameter optimization for surface roughness of multiple cut on HS-WEDM based on genetic algorithm

C. J. Li; Y. F. Guo; J. C. Bai; G. Z. Zhu; Z. S. Lu; Y. R. Feng

Parameter optimization for surface roughness of multiple cut on HS-WEDM based on genetic algorithm

C. J. Li, Y. F. Guo, J. C. Bai, G. Z. Zhu, Z. S. Lu, Y. R. Feng

Harbin Institute of Technology

Research output: Contribution to conference › Paper › peer-review

2 Citations (Scopus)

Abstract

High speed wire electrical discharge machining ( HS-WEDM) technique is a kind of original electrical processing technology in China. It has the advantages of low cost and simple fabrication, but its lower surface quality limits its wide utilize. Multiple cut on HS-WEDM technique can improve the machining accuracy and surface roughness. Orthogonal experiment was designed to analyze the most significant factors determining the surface roughness. Lots of single factor experiments were carried out, and formula concerning the significant factors was established and modified by the method of least squares. The best machining parameters in which the best surface roughness were analyzed using genetic algorithm in certain range. This method has high values in the practical use of HS-WEDM.

Original language	English
Pages	265-269
Number of pages	5
Publication status	Published - 2010
Externally published	Yes
Event	16th International Symposium on Electromachining, ISEM 2010 - Shanghai, China Duration: 19 Apr 2010 → 23 Apr 2010

Conference

Conference	16th International Symposium on Electromachining, ISEM 2010
Country/Territory	China
City	Shanghai
Period	19/04/10 → 23/04/10

Keywords

Genetic algorithm
HS-WEDM
Multiple cut
The method of least squares

Cite this

@conference{c56adac967924a99ae861dce36d2dd6e,

title = "Parameter optimization for surface roughness of multiple cut on HS-WEDM based on genetic algorithm",

abstract = "High speed wire electrical discharge machining ( HS-WEDM) technique is a kind of original electrical processing technology in China. It has the advantages of low cost and simple fabrication, but its lower surface quality limits its wide utilize. Multiple cut on HS-WEDM technique can improve the machining accuracy and surface roughness. Orthogonal experiment was designed to analyze the most significant factors determining the surface roughness. Lots of single factor experiments were carried out, and formula concerning the significant factors was established and modified by the method of least squares. The best machining parameters in which the best surface roughness were analyzed using genetic algorithm in certain range. This method has high values in the practical use of HS-WEDM.",

keywords = "Genetic algorithm, HS-WEDM, Multiple cut, The method of least squares",

author = "Li, {C. J.} and Guo, {Y. F.} and Bai, {J. C.} and Zhu, {G. Z.} and Lu, {Z. S.} and Feng, {Y. R.}",

year = "2010",

language = "English",

pages = "265--269",

note = "16th International Symposium on Electromachining, ISEM 2010 ; Conference date: 19-04-2010 Through 23-04-2010",

}

TY - CONF

T1 - Parameter optimization for surface roughness of multiple cut on HS-WEDM based on genetic algorithm

AU - Li, C. J.

AU - Guo, Y. F.

AU - Bai, J. C.

AU - Zhu, G. Z.

AU - Lu, Z. S.

AU - Feng, Y. R.

PY - 2010

Y1 - 2010

N2 - High speed wire electrical discharge machining ( HS-WEDM) technique is a kind of original electrical processing technology in China. It has the advantages of low cost and simple fabrication, but its lower surface quality limits its wide utilize. Multiple cut on HS-WEDM technique can improve the machining accuracy and surface roughness. Orthogonal experiment was designed to analyze the most significant factors determining the surface roughness. Lots of single factor experiments were carried out, and formula concerning the significant factors was established and modified by the method of least squares. The best machining parameters in which the best surface roughness were analyzed using genetic algorithm in certain range. This method has high values in the practical use of HS-WEDM.

AB - High speed wire electrical discharge machining ( HS-WEDM) technique is a kind of original electrical processing technology in China. It has the advantages of low cost and simple fabrication, but its lower surface quality limits its wide utilize. Multiple cut on HS-WEDM technique can improve the machining accuracy and surface roughness. Orthogonal experiment was designed to analyze the most significant factors determining the surface roughness. Lots of single factor experiments were carried out, and formula concerning the significant factors was established and modified by the method of least squares. The best machining parameters in which the best surface roughness were analyzed using genetic algorithm in certain range. This method has high values in the practical use of HS-WEDM.

KW - Genetic algorithm

KW - HS-WEDM

KW - Multiple cut

KW - The method of least squares

UR - http://www.scopus.com/inward/record.url?scp=84907336338&partnerID=8YFLogxK

M3 - Paper

AN - SCOPUS:84907336338

SP - 265

EP - 269

T2 - 16th International Symposium on Electromachining, ISEM 2010

Y2 - 19 April 2010 through 23 April 2010

ER -

Parameter optimization for surface roughness of multiple cut on HS-WEDM based on genetic algorithm

Abstract

Conference

Keywords

Other files and links

Fingerprint

Cite this