TY - GEN
T1 - Optimal parameters selection of noise FM jamming and its simulation
AU - Xun, Yang
AU - Cui, Zhanzhong
AU - Hao, Xinhong
PY - 2011
Y1 - 2011
N2 - Noise frequency modulation signal (noise FM signal) is the main form of noise jamming. The research on it is focused on its signal characteristics. However, the material about best parameters selection of the jamming with which the best cover effect can be gotten is rare. The noise FM signal and its output of the radio receiver are derived theoretically in the paper, and the range of signal parameters which can obtain the best jamming effect is gotten. The jamming effect of the noise FM jamming is mainly related to the bandwidth of the jamming, the structure of the modulation noise, and the bandwidth and dynamic response of the receiver. The jamming bandwidth is decided by the types of interference. The modulation noise's bandwidth is not the wider the better, but must be chosen between the best cover effect and the situation that the gain of dynamic response of the receiver dose not decline badly. Finally, the steps to determine the optimal parameters of jamming are summarized, and the typical parameter list and simulation are given.
AB - Noise frequency modulation signal (noise FM signal) is the main form of noise jamming. The research on it is focused on its signal characteristics. However, the material about best parameters selection of the jamming with which the best cover effect can be gotten is rare. The noise FM signal and its output of the radio receiver are derived theoretically in the paper, and the range of signal parameters which can obtain the best jamming effect is gotten. The jamming effect of the noise FM jamming is mainly related to the bandwidth of the jamming, the structure of the modulation noise, and the bandwidth and dynamic response of the receiver. The jamming bandwidth is decided by the types of interference. The modulation noise's bandwidth is not the wider the better, but must be chosen between the best cover effect and the situation that the gain of dynamic response of the receiver dose not decline badly. Finally, the steps to determine the optimal parameters of jamming are summarized, and the typical parameter list and simulation are given.
KW - electronic counter measures
KW - noise FM signal
KW - noise jamming
KW - parameters selection
UR - http://www.scopus.com/inward/record.url?scp=79958274747&partnerID=8YFLogxK
U2 - 10.1109/CECNET.2011.5768592
DO - 10.1109/CECNET.2011.5768592
M3 - Conference contribution
AN - SCOPUS:79958274747
SN - 9781612844572
T3 - 2011 International Conference on Consumer Electronics, Communications and Networks, CECNet 2011 - Proceedings
SP - 2385
EP - 2389
BT - 2011 International Conference on Consumer Electronics, Communications and Networks, CECNet 2011 - Proceedings
T2 - 2011 International Conference on Consumer Electronics, Communications and Networks, CECNet 2011
Y2 - 16 April 2011 through 18 April 2011
ER -