Multi-node data acquisition and analysis system for the development of at electronic control unit

Wei Chen; Yong Zhai; Gang Tao; Yuefeng Ma

doi:10.1109/EMEIT.2011.6023711

Multi-node data acquisition and analysis system for the development of at electronic control unit

Wei Chen^*, Yong Zhai, Gang Tao, Yuefeng Ma

^*Corresponding author for this work

School of Mechanical Engineering

Beijing Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

In this paper, a multi-node data acquisition and analysis system for the development of AT ECU (electronic control unit)is designed. The system acquires data from each node on the bus and sends the data to PC through CAN card, while designing data display, storage and analysis system on PC through LabVIEW8.6 platform in order to monitor control signals and state parameters of the automatic transmission in real-time. This system can improve the efficiency of data processing and shorten the development cycle for ECU by analyzing the data acquired.

Original language	English
Title of host publication	Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011
Pages	3281-3284
Number of pages	4
DOIs	https://doi.org/10.1109/EMEIT.2011.6023711
Publication status	Published - 2011
Event	2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011 - Harbin, China Duration: 12 Aug 2011 → 14 Aug 2011

Publication series

Name	Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011
Volume	6

Conference

Conference	2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011
Country/Territory	China
City	Harbin
Period	12/08/11 → 14/08/11

Keywords

AT
acquisition
analysis
multi-node

Access to Document

10.1109/EMEIT.2011.6023711

Cite this

Chen, W., Zhai, Y., Tao, G., & Ma, Y. (2011). Multi-node data acquisition and analysis system for the development of at electronic control unit. In Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011 (pp. 3281-3284). Article 6023711 (Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011; Vol. 6). https://doi.org/10.1109/EMEIT.2011.6023711

Chen, Wei ; Zhai, Yong ; Tao, Gang et al. / Multi-node data acquisition and analysis system for the development of at electronic control unit. Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011. 2011. pp. 3281-3284 (Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011).

@inproceedings{0936ce3a134740b0be36ef8cbc5c81d0,

title = "Multi-node data acquisition and analysis system for the development of at electronic control unit",

abstract = "In this paper, a multi-node data acquisition and analysis system for the development of AT ECU (electronic control unit)is designed. The system acquires data from each node on the bus and sends the data to PC through CAN card, while designing data display, storage and analysis system on PC through LabVIEW8.6 platform in order to monitor control signals and state parameters of the automatic transmission in real-time. This system can improve the efficiency of data processing and shorten the development cycle for ECU by analyzing the data acquired.",

keywords = "AT, acquisition, analysis, multi-node",

author = "Wei Chen and Yong Zhai and Gang Tao and Yuefeng Ma",

year = "2011",

doi = "10.1109/EMEIT.2011.6023711",

language = "English",

isbn = "9781612840857",

series = "Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011",

pages = "3281--3284",

booktitle = "Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011",

note = "2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011 ; Conference date: 12-08-2011 Through 14-08-2011",

}

Chen, W, Zhai, Y , Tao, G & Ma, Y 2011, Multi-node data acquisition and analysis system for the development of at electronic control unit. in Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011., 6023711, Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011, vol. 6, pp. 3281-3284, 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011, Harbin, China, 12/08/11. https://doi.org/10.1109/EMEIT.2011.6023711

Multi-node data acquisition and analysis system for the development of at electronic control unit. / Chen, Wei; Zhai, Yong ; Tao, Gang et al.
Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011. 2011. p. 3281-3284 6023711 (Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011; Vol. 6).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Multi-node data acquisition and analysis system for the development of at electronic control unit

AU - Chen, Wei

AU - Zhai, Yong

AU - Tao, Gang

AU - Ma, Yuefeng

PY - 2011

Y1 - 2011

N2 - In this paper, a multi-node data acquisition and analysis system for the development of AT ECU (electronic control unit)is designed. The system acquires data from each node on the bus and sends the data to PC through CAN card, while designing data display, storage and analysis system on PC through LabVIEW8.6 platform in order to monitor control signals and state parameters of the automatic transmission in real-time. This system can improve the efficiency of data processing and shorten the development cycle for ECU by analyzing the data acquired.

AB - In this paper, a multi-node data acquisition and analysis system for the development of AT ECU (electronic control unit)is designed. The system acquires data from each node on the bus and sends the data to PC through CAN card, while designing data display, storage and analysis system on PC through LabVIEW8.6 platform in order to monitor control signals and state parameters of the automatic transmission in real-time. This system can improve the efficiency of data processing and shorten the development cycle for ECU by analyzing the data acquired.

KW - AT

KW - acquisition

KW - analysis

KW - multi-node

UR - http://www.scopus.com/inward/record.url?scp=80053429742&partnerID=8YFLogxK

U2 - 10.1109/EMEIT.2011.6023711

DO - 10.1109/EMEIT.2011.6023711

M3 - Conference contribution

AN - SCOPUS:80053429742

SN - 9781612840857

T3 - Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011

SP - 3281

EP - 3284

BT - Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011

T2 - 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011

Y2 - 12 August 2011 through 14 August 2011

ER -

Chen W, Zhai Y , Tao G , Ma Y. Multi-node data acquisition and analysis system for the development of at electronic control unit. In Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011. 2011. p. 3281-3284. 6023711. (Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, EMEIT 2011). doi: 10.1109/EMEIT.2011.6023711

Multi-node data acquisition and analysis system for the development of at electronic control unit

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this