TY - GEN
T1 - Low-Cost Parylene Based Micro Humidity Sensor for Integrated Human Thermal Comfort Sensing
AU - Izhar,
AU - Wang, Xiaoyi
AU - Xu, Wei
AU - Tavakkoli, Hadi
AU - Lee, Yi Kuen
N1 - Publisher Copyright:
© 2020 IEEE.
PY - 2020/9/27
Y1 - 2020/9/27
N2 - In this paper, we report a CMOS-MEMS compatible Parylene C based Humidity Sensor (PHS) to be used for integrated human thermal comfort sensing for smart buildings. Interdigitated platinum (Pt) electrodes are deposited on a silicon substrate. A parylene C thin film as hygroscopic layer is coated on the electrodes using room-temperature chemical vapor deposition (CVD) technique. Three sensors with various dimensions (1.2 mm2, 4.8 mm2, and 7.5 mm2) are fabricated to study the size effect of the sensor on the sensitivity. The impedance, phase and capacitive response of the sensor at different frequencies of the operating voltage under various relative humidity (RH) levels are investigated. The overall impedance and capacitance changed from 23.02 to 3.744 MŸ and 64.165 to 194.14 pF respectively at 100 Hz operating frequency for the 4.8 mm2 sensor when RH is increased from 0.1 to 92%. The measured PHS's sensitivity at the frequencies of 1100 kHz shows highest (1.428 pF/%RH) at low frequency (100 Hz). The PHS with large sensing area showed higher sensitivity (0.11 0.53 pF/%RH) compared to medium and small sensors. Moreover, the PHS is tested for 3 days depicting good stability with respect to time.
AB - In this paper, we report a CMOS-MEMS compatible Parylene C based Humidity Sensor (PHS) to be used for integrated human thermal comfort sensing for smart buildings. Interdigitated platinum (Pt) electrodes are deposited on a silicon substrate. A parylene C thin film as hygroscopic layer is coated on the electrodes using room-temperature chemical vapor deposition (CVD) technique. Three sensors with various dimensions (1.2 mm2, 4.8 mm2, and 7.5 mm2) are fabricated to study the size effect of the sensor on the sensitivity. The impedance, phase and capacitive response of the sensor at different frequencies of the operating voltage under various relative humidity (RH) levels are investigated. The overall impedance and capacitance changed from 23.02 to 3.744 MŸ and 64.165 to 194.14 pF respectively at 100 Hz operating frequency for the 4.8 mm2 sensor when RH is increased from 0.1 to 92%. The measured PHS's sensitivity at the frequencies of 1100 kHz shows highest (1.428 pF/%RH) at low frequency (100 Hz). The PHS with large sensing area showed higher sensitivity (0.11 0.53 pF/%RH) compared to medium and small sensors. Moreover, the PHS is tested for 3 days depicting good stability with respect to time.
UR - http://www.scopus.com/inward/record.url?scp=85098528565&partnerID=8YFLogxK
U2 - 10.1109/NEMS50311.2020.9265630
DO - 10.1109/NEMS50311.2020.9265630
M3 - Conference contribution
AN - SCOPUS:85098528565
T3 - 15th IEEE International Conference on Nano/Micro Engineered and Molecular System, NEMS 2020
SP - 134
EP - 138
BT - 15th IEEE International Conference on Nano/Micro Engineered and Molecular System, NEMS 2020
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - 15th IEEE International Conference on Nano/Micro Engineered and Molecular System, NEMS 2020
Y2 - 27 September 2020 through 30 September 2020
ER -