Implementation and validation of a generalized wall stress function

The generalized wall function by Shih et al. [Report No. M-1999-209398 (1999)], which accounts for non-equilibrium effects by the presence of favorable and adverse pressure gradients in turbulent flows, is addressed with the aim of performing high Reynolds number large-eddy simulations of the wall-bounded flow. The model uses a corrected law of the wall with a pressure gradient contribution to approximate the wall stress and applies to the entire viscous layer, buffer layer, and inertial region. A fully developed channel flow is first tested to validate the solver and model implementation, and then the wall function is assessed for the flow over a periodic hill. Wall-resolved simulations are in good agreement with reference results. A priori investigation with own experimental results corroborates the mathematical form of the model and suggests using different coefficients. The wall-modeled simulations show that the implemented wall model is able to improve the wall shear stress predictions compared to a standard equilibrium wall model. It corrects the underestimation of wall shear stresses by equilibrium models in the favorable pressure gradient region and the overestimation of wall shear stresses in the adverse pressure gradient region. The positions of the separation and reattachment points are also in good agreement with reference results. Furthermore, the prediction of the wall shear stress maximum in the favorable pressure gradient zone at the windward side of the hill is quite robust against coarsening the wall-normal grid spacing.