Enhancing the Scanning Gain of Phased Array Antenna Using a Holographic Metasurface

Xiangyu Yin, Wu Ren*, Zhenghui Xue, Weiming Li

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

1 Citation (Scopus)

Abstract

Due to the influence of mutual coupling between the antenna elements, the scanning performance of planar phased array antenna deteriorates significantly with the increase of scanning angle, which limits the ability of an antenna to detect targets at low elevation angles. A scan gain enhancing surface (SGES) consisting of a holographic metasurface (HM) and a surface-wave guiding structure (SWGS) is proposed in this letter. HM is loaded at both ends of the phased array, which can convert surface waves into leaky waves and radiate in the specified direction, thereby enhancing the beam gain of the phased array. The SWGS can promote the surface-wave propagation to the HM, thus improving the surface-wave conversion efficiency. An eight-element patch linear array was designed and fabricated to verify the effectiveness of the SGES. The measurement results show that the antenna array loaded with SGES can scan up to ± 57° with only 0.4 dB reduction in realized gain. The realized gain can be increased by up to 3.6 dB. Good agreement is obtained between the measurements and the simulations.

Original languageEnglish
Pages (from-to)538-542
Number of pages5
JournalIEEE Antennas and Wireless Propagation Letters
Volume23
Issue number2
DOIs
Publication statusPublished - 1 Feb 2024

Keywords

  • Holographic metasurface (HM)
  • phased array
  • scan gain enhancing

Fingerprint

Dive into the research topics of 'Enhancing the Scanning Gain of Phased Array Antenna Using a Holographic Metasurface'. Together they form a unique fingerprint.

Cite this