Effects of forging and heat treatments on the microstructure and oxidation behavior of 316LN stainless steel in high temperature water

Yueling Guo, En Hou Han*, Jianqiu Wang

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

38 Citations (Scopus)

Abstract

Microstructure of 316LN stainless steel (ss), including the as-received material and samples processed by solution anneal treatment and stress relief treatment after forging, was characterized by Vickers hardness (HV) testing and electron back scattering diffraction (EBSD). The oxide film formed on samples after immersion in borated and lithiated water at 583.15K was investigated by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Results showed that the grain size of samples was largely reduced after forging. Higher fraction of coincidence site lattice (CSL) boundaries and lower residual strain were observed in samples with either solution anneal treatment or stress relief treatment. The proportion of CSL boundaries was largely enhanced by solution anneal treatment after forging, due to the recrystallization occurring during solution anneal treatment. The oxide film grown on 316LNss with solution anneal treatment after forging exhibited more strong protectiveness, as compared to the oxide film grown on samples with stress relief treatment after forging and the oxide film grown on as-received samples without forging. The mechanisms of oxidation were then discussed.

Original languageEnglish
Pages (from-to)403-412
Number of pages10
JournalJournal of Materials Science and Technology
Volume31
Issue number4
DOIs
Publication statusPublished - 1 Apr 2015
Externally publishedYes

Keywords

  • Corrosion
  • Forging
  • Oxide film
  • Residual strain
  • Stainless steel

Fingerprint

Dive into the research topics of 'Effects of forging and heat treatments on the microstructure and oxidation behavior of 316LN stainless steel in high temperature water'. Together they form a unique fingerprint.

Cite this