TY - GEN
T1 - Effect of photocatalytic oxidation technology on GaN CMP
AU - Wang, Jie
AU - Wang, Tongqing
AU - Cheng, Jie
AU - Li, Hongkai
AU - Rao, Can
AU - Lu, Xinchun
N1 - Publisher Copyright:
© 2015 American Vacuum Society.
PY - 2016/2/17
Y1 - 2016/2/17
N2 - GaN is so hard and so chemically inert that it is difficult to obtain high MRR in CMP process, thus photocatalytic oxidation technology was adopted in this study to realize efficient removal. Two kinds of N type semiconductor particles, which are TiO2 and SnO2, were added to the H2O2-SiO2-based slurry working as the catalysts. By optical excitation, highly reactive photoinduced holes will be produced on the surface of the catalytic particles, which can oxidize OH-and H2O absorbed on the surface of the catalysts, therefore more OH∗ will be generated. Compared with SnO2, TiO2 has larger specific area and smaller band gap, which are in favor of photocatalytic oxidation reaction. Consequently, GaN MRRs in H202-SiO2-based polishing system combined with catalysts are improved significantly, especially using TiO2, the MRR of which is 122nm/h. XPS analysis shows the variation trend of chemical composition on GaN surface after polishing, with more surface defects removal, the ratio of metallic Ga is lower and the ratio of GaN is higher when using TiO2, which reveals the planarization process. Besides, physical removal model is proposed to describe the removal mechanism of GaN when using photocatalytic oxidation technology. As more OH∗ are generated in the slurry, the thickness of the oxide layer increases, which contribute to the mechanical grinding process by SiO2, hence GaN MRR was improved.
AB - GaN is so hard and so chemically inert that it is difficult to obtain high MRR in CMP process, thus photocatalytic oxidation technology was adopted in this study to realize efficient removal. Two kinds of N type semiconductor particles, which are TiO2 and SnO2, were added to the H2O2-SiO2-based slurry working as the catalysts. By optical excitation, highly reactive photoinduced holes will be produced on the surface of the catalytic particles, which can oxidize OH-and H2O absorbed on the surface of the catalysts, therefore more OH∗ will be generated. Compared with SnO2, TiO2 has larger specific area and smaller band gap, which are in favor of photocatalytic oxidation reaction. Consequently, GaN MRRs in H202-SiO2-based polishing system combined with catalysts are improved significantly, especially using TiO2, the MRR of which is 122nm/h. XPS analysis shows the variation trend of chemical composition on GaN surface after polishing, with more surface defects removal, the ratio of metallic Ga is lower and the ratio of GaN is higher when using TiO2, which reveals the planarization process. Besides, physical removal model is proposed to describe the removal mechanism of GaN when using photocatalytic oxidation technology. As more OH∗ are generated in the slurry, the thickness of the oxide layer increases, which contribute to the mechanical grinding process by SiO2, hence GaN MRR was improved.
UR - http://www.scopus.com/inward/record.url?scp=84964434749&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:84964434749
T3 - 2015 International Conference on Planarization/CMP Technology, ICPT 2015
BT - 2015 International Conference on Planarization/CMP Technology, ICPT 2015
PB - Institute of Electrical and Electronics Engineers Inc.
T2 - International Conference on Planarization/CMP Technology, ICPT 2015
Y2 - 30 September 2015 through 2 October 2015
ER -