Design and fabrication of a 2 mm-band sub-harmonic mixer based on quartz

Da Wei An, Wei Hua Yu*, Xin Lv

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

An integrated 2 mm band sub-harmonic mixer based on quartz circuits was presented. General harmonic mixer theory was introduced. The equivalent circuit model for the anti-pair diodes was built. Then the extensive simulation and optimization by the full wave analysis software were done. When the 59 GHz LO signal's power was set between 7~14 dBm, the mixer yielded a least conversion loss of 17 dB and a maximum loss less than 20 dB under working frequency of 116~120 GHz. The P1Db of the mixer is about 1 dBm. The isolation between the three ports is better than 20 dB. The measured results of the sub-harmonic mixer are agreed well with the simulated ones.

Original languageEnglish
Pages (from-to)33-37
Number of pages5
JournalHongwai Yu Haomibo Xuebao/Journal of Infrared and Millimeter Waves
Volume30
Issue number1
DOIs
Publication statusPublished - Feb 2011

Keywords

  • Anti-pair diode
  • Millimeter wave
  • Sub-harmonic mixer
  • TRL method

Fingerprint

Dive into the research topics of 'Design and fabrication of a 2 mm-band sub-harmonic mixer based on quartz'. Together they form a unique fingerprint.

Cite this