Complementary Split Ring Resonator based Metamaterial sensor for Dielectric Materials Measurements

Waseem Shahzad; Wei Dong Hu; Abdul Samad; Leo P. Ligthart

doi:10.1109/IBCAST47879.2020.9044550

Complementary Split Ring Resonator based Metamaterial sensor for Dielectric Materials Measurements

Waseem Shahzad, Wei Dong Hu, Abdul Samad, Leo P. Ligthart

School of Integrated Circuits and Electronics

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

Dual split ring resonator based Metamaterial sensor materials is presented in this paper. This complementary split ring resonator (CSRR) is etched in the ground plane on back of the Microstrip line. Full wave electromagnetic simulation is done to verify the resonance phenomenon. Presented metamaterial sensor shows good result around 6GHz. Simulation results show S21 with -31 dB notch depth at resonant frequency. Electromagnetic properties like effective electric permittivity (varepsilon) and magnetic permeability (μ) of the sensor are derived from S-parameters simulation. Standard photolithography technique is used in fabrication of this metamaterial sensor using low cost FR4 substrate. S-parameters are measured by using Keysight technologies Vector Network Analyzer N5224B. S-parameters simulated and measured results show good agreement. By measurement of only resonant frequency (GHz) and the magnitude (dB) response of the sensor with material under test (MUT) the dielectric constant of the material can be calculated numerically. This nondestructive measurement technique has many applications in material testing for security and bio-sensing.

Original language	English
Title of host publication	Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	695-698
Number of pages	4
ISBN (Electronic)	9781728146768
DOIs	https://doi.org/10.1109/IBCAST47879.2020.9044550
Publication status	Published - Jan 2020
Event	17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020 - Islamabad, Pakistan Duration: 14 Jan 2020 → 18 Jan 2020

Publication series

Name	Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020

Conference

Conference	17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020
Country/Territory	Pakistan
City	Islamabad
Period	14/01/20 → 18/01/20

Keywords

Complementary Split Ring Resonator
Metamaterial sensor
negative permittivity and permeability
nondestructive measurements

Access to Document

10.1109/IBCAST47879.2020.9044550

Cite this

Shahzad, W., Hu, W. D., Samad, A., & Ligthart, L. P. (2020). Complementary Split Ring Resonator based Metamaterial sensor for Dielectric Materials Measurements. In Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020 (pp. 695-698). Article 9044550 (Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/IBCAST47879.2020.9044550

Shahzad, Waseem ; Hu, Wei Dong ; Samad, Abdul et al. / Complementary Split Ring Resonator based Metamaterial sensor for Dielectric Materials Measurements. Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020. Institute of Electrical and Electronics Engineers Inc., 2020. pp. 695-698 (Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020).

@inproceedings{a2f7e143c6c542e68b524d07cf018c90,

title = "Complementary Split Ring Resonator based Metamaterial sensor for Dielectric Materials Measurements",

abstract = "Dual split ring resonator based Metamaterial sensor materials is presented in this paper. This complementary split ring resonator (CSRR) is etched in the ground plane on back of the Microstrip line. Full wave electromagnetic simulation is done to verify the resonance phenomenon. Presented metamaterial sensor shows good result around 6GHz. Simulation results show S21 with -31 dB notch depth at resonant frequency. Electromagnetic properties like effective electric permittivity (varepsilon) and magnetic permeability (μ) of the sensor are derived from S-parameters simulation. Standard photolithography technique is used in fabrication of this metamaterial sensor using low cost FR4 substrate. S-parameters are measured by using Keysight technologies Vector Network Analyzer N5224B. S-parameters simulated and measured results show good agreement. By measurement of only resonant frequency (GHz) and the magnitude (dB) response of the sensor with material under test (MUT) the dielectric constant of the material can be calculated numerically. This nondestructive measurement technique has many applications in material testing for security and bio-sensing.",

keywords = "Complementary Split Ring Resonator, Metamaterial sensor, negative permittivity and permeability, nondestructive measurements",

author = "Waseem Shahzad and Hu, {Wei Dong} and Abdul Samad and Ligthart, {Leo P.}",

note = "Publisher Copyright: {\textcopyright} 2020 IEEE.; 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020 ; Conference date: 14-01-2020 Through 18-01-2020",

year = "2020",

month = jan,

doi = "10.1109/IBCAST47879.2020.9044550",

language = "English",

series = "Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "695--698",

booktitle = "Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020",

address = "United States",

}

Shahzad, W, Hu, WD, Samad, A & Ligthart, LP 2020, Complementary Split Ring Resonator based Metamaterial sensor for Dielectric Materials Measurements. in Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020., 9044550, Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020, Institute of Electrical and Electronics Engineers Inc., pp. 695-698, 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020, Islamabad, Pakistan, 14/01/20. https://doi.org/10.1109/IBCAST47879.2020.9044550

Complementary Split Ring Resonator based Metamaterial sensor for Dielectric Materials Measurements. / Shahzad, Waseem; Hu, Wei Dong; Samad, Abdul et al.
Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020. Institute of Electrical and Electronics Engineers Inc., 2020. p. 695-698 9044550 (Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Complementary Split Ring Resonator based Metamaterial sensor for Dielectric Materials Measurements

AU - Shahzad, Waseem

AU - Hu, Wei Dong

AU - Samad, Abdul

AU - Ligthart, Leo P.

PY - 2020/1

Y1 - 2020/1

N2 - Dual split ring resonator based Metamaterial sensor materials is presented in this paper. This complementary split ring resonator (CSRR) is etched in the ground plane on back of the Microstrip line. Full wave electromagnetic simulation is done to verify the resonance phenomenon. Presented metamaterial sensor shows good result around 6GHz. Simulation results show S21 with -31 dB notch depth at resonant frequency. Electromagnetic properties like effective electric permittivity (varepsilon) and magnetic permeability (μ) of the sensor are derived from S-parameters simulation. Standard photolithography technique is used in fabrication of this metamaterial sensor using low cost FR4 substrate. S-parameters are measured by using Keysight technologies Vector Network Analyzer N5224B. S-parameters simulated and measured results show good agreement. By measurement of only resonant frequency (GHz) and the magnitude (dB) response of the sensor with material under test (MUT) the dielectric constant of the material can be calculated numerically. This nondestructive measurement technique has many applications in material testing for security and bio-sensing.

AB - Dual split ring resonator based Metamaterial sensor materials is presented in this paper. This complementary split ring resonator (CSRR) is etched in the ground plane on back of the Microstrip line. Full wave electromagnetic simulation is done to verify the resonance phenomenon. Presented metamaterial sensor shows good result around 6GHz. Simulation results show S21 with -31 dB notch depth at resonant frequency. Electromagnetic properties like effective electric permittivity (varepsilon) and magnetic permeability (μ) of the sensor are derived from S-parameters simulation. Standard photolithography technique is used in fabrication of this metamaterial sensor using low cost FR4 substrate. S-parameters are measured by using Keysight technologies Vector Network Analyzer N5224B. S-parameters simulated and measured results show good agreement. By measurement of only resonant frequency (GHz) and the magnitude (dB) response of the sensor with material under test (MUT) the dielectric constant of the material can be calculated numerically. This nondestructive measurement technique has many applications in material testing for security and bio-sensing.

KW - Complementary Split Ring Resonator

KW - Metamaterial sensor

KW - negative permittivity and permeability

KW - nondestructive measurements

UR - http://www.scopus.com/inward/record.url?scp=85085476179&partnerID=8YFLogxK

U2 - 10.1109/IBCAST47879.2020.9044550

DO - 10.1109/IBCAST47879.2020.9044550

M3 - Conference contribution

AN - SCOPUS:85085476179

T3 - Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020

SP - 695

EP - 698

BT - Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020

Y2 - 14 January 2020 through 18 January 2020

ER -

Shahzad W, Hu WD, Samad A, Ligthart LP. Complementary Split Ring Resonator based Metamaterial sensor for Dielectric Materials Measurements. In Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020. Institute of Electrical and Electronics Engineers Inc. 2020. p. 695-698. 9044550. (Proceedings of 2020 17th International Bhurban Conference on Applied Sciences and Technology, IBCAST 2020). doi: 10.1109/IBCAST47879.2020.9044550

Complementary Split Ring Resonator based Metamaterial sensor for Dielectric Materials Measurements

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this