Acquisition and analysis of target acoustic & seismic signals for networked ammunition

Li Ming*, Yuan Zi, Jiang Chunlan

*Corresponding author for this work

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

Abstract

Based on the introduction of the acoustic and seismic detection technology for the networked ammunitions, a data acquisition system with an input of eight channels for the acoustic and seismic signals is designed for the distributed acoustic and seismic sensor arrays. Programs are made for the spectrum analysis, design of the filter, time delay estimation of the multichannel signals. The acquisition of acoustic and seismic signals of the moving target is carried out in the field. Several sets of experiment data are obtained, and one set of acoustic signal and seismic signal are analyzed in this paper. The spectrum of the signal is analyzed and a filter is designed according to the spectrum. The signals are filtered and cross-correlation is made for the acquired multichannel signals. Then the time delay of the multichannel signals is obtained. At last, the cross-correlation result and the time delay estimation result are analyzed in this paper.

Original languageEnglish
Title of host publicationProceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010
PublisherIEEE Computer Society
Pages194-197
Number of pages4
ISBN (Print)9780769542126
DOIs
Publication statusPublished - 2010
Externally publishedYes

Publication series

NameProceedings - 2010 International Conference on Intelligent System Design and Engineering Application, ISDEA 2010
Volume1

Keywords

  • Acoustic signal
  • Data acquisition
  • Networked ammunition
  • Seismic signal
  • Time delay estimation

Fingerprint

Dive into the research topics of 'Acquisition and analysis of target acoustic & seismic signals for networked ammunition'. Together they form a unique fingerprint.

Cite this