A LTCC stripline bandpass filter for ku-band receiver module

Yinqiao Li; Anhua Ji; Yuanchun Fei; Jianming Zhou

doi:10.1109/ICMMT.2008.4540368

A LTCC stripline bandpass filter for ku-band receiver module

Yinqiao Li^*, Anhua Ji, Yuanchun Fei, Jianming Zhou

^*Corresponding author for this work

School of Integrated Circuits and Electronics

Beijing Institute of Technology

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Citations (Scopus)

Abstract

An embedded low temperature co-fired ceramic (LTCC) bandpass filter (BPF) for Ku-band Receiver module is presented in this paper. The measurements of initial fabricated filter exhibit an insertion loss of 2.6 dB and a 2.9 GHz passband with the centre frequency at 16.45 GHz, including the GCPW to stripline transition and RF coaxial connector. Electromagnetic (EM) simulation is employed to optimize the filter response and a GCPW to stripline transition. A quasi coaxial configuration is applied to reducing the influence caused by the transition structure. Improved BPF integrated with the transition shows an insertion loss less than 1.5 dB, a return loss below -17.2 dB in the pass-band and less spurious response in the stop-band by EM simulation.

Original language	English
Title of host publication	2008 International Conference on Microwave and Millimeter Wave Technology Proceedings, ICMMT
Pages	301-303
Number of pages	3
DOIs	https://doi.org/10.1109/ICMMT.2008.4540368
Publication status	Published - 2008
Event	2008 International Conference on Microwave and Millimeter Wave Technology, ICMMT - Nanjing, China Duration: 21 Apr 2008 → 24 Apr 2008

Publication series

Name	2008 International Conference on Microwave and Millimeter Wave Technology Proceedings, ICMMT
Volume	1

Conference

Conference	2008 International Conference on Microwave and Millimeter Wave Technology, ICMMT
Country/Territory	China
City	Nanjing
Period	21/04/08 → 24/04/08

Access to Document

10.1109/ICMMT.2008.4540368

Cite this

Li, Y., Ji, A., Fei, Y., & Zhou, J. (2008). A LTCC stripline bandpass filter for ku-band receiver module. In 2008 International Conference on Microwave and Millimeter Wave Technology Proceedings, ICMMT (pp. 301-303). Article 4540368 (2008 International Conference on Microwave and Millimeter Wave Technology Proceedings, ICMMT; Vol. 1). https://doi.org/10.1109/ICMMT.2008.4540368

@inproceedings{5a6f964669ff4f44be1ed6559c9f570a,

title = "A LTCC stripline bandpass filter for ku-band receiver module",

abstract = "An embedded low temperature co-fired ceramic (LTCC) bandpass filter (BPF) for Ku-band Receiver module is presented in this paper. The measurements of initial fabricated filter exhibit an insertion loss of 2.6 dB and a 2.9 GHz passband with the centre frequency at 16.45 GHz, including the GCPW to stripline transition and RF coaxial connector. Electromagnetic (EM) simulation is employed to optimize the filter response and a GCPW to stripline transition. A quasi coaxial configuration is applied to reducing the influence caused by the transition structure. Improved BPF integrated with the transition shows an insertion loss less than 1.5 dB, a return loss below -17.2 dB in the pass-band and less spurious response in the stop-band by EM simulation.",

author = "Yinqiao Li and Anhua Ji and Yuanchun Fei and Jianming Zhou",

year = "2008",

doi = "10.1109/ICMMT.2008.4540368",

language = "English",

isbn = "9781424418794",

series = "2008 International Conference on Microwave and Millimeter Wave Technology Proceedings, ICMMT",

pages = "301--303",

booktitle = "2008 International Conference on Microwave and Millimeter Wave Technology Proceedings, ICMMT",

note = "2008 International Conference on Microwave and Millimeter Wave Technology, ICMMT ; Conference date: 21-04-2008 Through 24-04-2008",

}

Li, Y, Ji, A, Fei, Y & Zhou, J 2008, A LTCC stripline bandpass filter for ku-band receiver module. in 2008 International Conference on Microwave and Millimeter Wave Technology Proceedings, ICMMT., 4540368, 2008 International Conference on Microwave and Millimeter Wave Technology Proceedings, ICMMT, vol. 1, pp. 301-303, 2008 International Conference on Microwave and Millimeter Wave Technology, ICMMT, Nanjing, China, 21/04/08. https://doi.org/10.1109/ICMMT.2008.4540368

A LTCC stripline bandpass filter for ku-band receiver module. / Li, Yinqiao; Ji, Anhua; Fei, Yuanchun et al.
2008 International Conference on Microwave and Millimeter Wave Technology Proceedings, ICMMT. 2008. p. 301-303 4540368 (2008 International Conference on Microwave and Millimeter Wave Technology Proceedings, ICMMT; Vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - A LTCC stripline bandpass filter for ku-band receiver module

AU - Li, Yinqiao

AU - Ji, Anhua

AU - Fei, Yuanchun

AU - Zhou, Jianming

PY - 2008

Y1 - 2008

N2 - An embedded low temperature co-fired ceramic (LTCC) bandpass filter (BPF) for Ku-band Receiver module is presented in this paper. The measurements of initial fabricated filter exhibit an insertion loss of 2.6 dB and a 2.9 GHz passband with the centre frequency at 16.45 GHz, including the GCPW to stripline transition and RF coaxial connector. Electromagnetic (EM) simulation is employed to optimize the filter response and a GCPW to stripline transition. A quasi coaxial configuration is applied to reducing the influence caused by the transition structure. Improved BPF integrated with the transition shows an insertion loss less than 1.5 dB, a return loss below -17.2 dB in the pass-band and less spurious response in the stop-band by EM simulation.

AB - An embedded low temperature co-fired ceramic (LTCC) bandpass filter (BPF) for Ku-band Receiver module is presented in this paper. The measurements of initial fabricated filter exhibit an insertion loss of 2.6 dB and a 2.9 GHz passband with the centre frequency at 16.45 GHz, including the GCPW to stripline transition and RF coaxial connector. Electromagnetic (EM) simulation is employed to optimize the filter response and a GCPW to stripline transition. A quasi coaxial configuration is applied to reducing the influence caused by the transition structure. Improved BPF integrated with the transition shows an insertion loss less than 1.5 dB, a return loss below -17.2 dB in the pass-band and less spurious response in the stop-band by EM simulation.

UR - http://www.scopus.com/inward/record.url?scp=51149124145&partnerID=8YFLogxK

U2 - 10.1109/ICMMT.2008.4540368

DO - 10.1109/ICMMT.2008.4540368

M3 - Conference contribution

AN - SCOPUS:51149124145

SN - 9781424418794

T3 - 2008 International Conference on Microwave and Millimeter Wave Technology Proceedings, ICMMT

SP - 301

EP - 303

BT - 2008 International Conference on Microwave and Millimeter Wave Technology Proceedings, ICMMT

T2 - 2008 International Conference on Microwave and Millimeter Wave Technology, ICMMT

Y2 - 21 April 2008 through 24 April 2008

ER -

A LTCC stripline bandpass filter for ku-band receiver module

Abstract

Publication series

Conference

Access to Document

Other files and links

Fingerprint

Cite this