面向轴孔类零件圆度误差评定的改进式最小区域圆法

Ci Song; Li Jiao; Xibin Wang; Zhibing Liu; Hui Chen

doi:10.3969/j.issn.1004-132X.2022.09.011

面向轴孔类零件圆度误差评定的改进式最小区域圆法

Translated title of the contribution: Improved Minimum Zone Circle Method for Roundness Error Evaluation of Shaft and Hole Parts

Ci Song, Li Jiao, Xibin Wang, Zhibing Liu^*, Hui Chen

^*Corresponding author for this work

School of Mechanical Engineering

Beijing Institute of Technology

Research output: Contribution to journal › Article › peer-review

8 Citations (Scopus)

Abstract

An improved minimum zone circle method was proposed for roundness error evaluation of shaft hole parts. Based on computational geometry, the distance relationship between measuring points was determined, and the solving processes of control points of minimum circumscribed circle and maximum inscribed circle were optimized according to polygon removal rule. Then, the minimum zone was constructed according to the relationship among the control points of the minimum circumscribed circle, the maximum inscribed circle and the minimum zone circle. Finally, the effectiveness and accuracy of the proposed method were verified by experimental results.

Translated title of the contribution	Improved Minimum Zone Circle Method for Roundness Error Evaluation of Shaft and Hole Parts
Original language	Chinese (Traditional)
Pages (from-to)	1090-1097 and 1114
Journal	Zhongguo Jixie Gongcheng/China Mechanical Engineering
Volume	33
Issue number	9
DOIs	https://doi.org/10.3969/j.issn.1004-132X.2022.09.011
Publication status	Published - 10 May 2022

Access to Document

10.3969/j.issn.1004-132X.2022.09.011

Cite this

@article{e632b2fd4ecd4264a00575771d16f8bc,

title = "面向轴孔类零件圆度误差评定的改进式最小区域圆法",

abstract = "An improved minimum zone circle method was proposed for roundness error evaluation of shaft hole parts. Based on computational geometry, the distance relationship between measuring points was determined, and the solving processes of control points of minimum circumscribed circle and maximum inscribed circle were optimized according to polygon removal rule. Then, the minimum zone was constructed according to the relationship among the control points of the minimum circumscribed circle, the maximum inscribed circle and the minimum zone circle. Finally, the effectiveness and accuracy of the proposed method were verified by experimental results.",

keywords = "Improved minimum zone circle method, Polygon removal rule, Roundness error evaluation, Shaft and hole part",

author = "Ci Song and Li Jiao and Xibin Wang and Zhibing Liu and Hui Chen",

year = "2022",

month = may,

day = "10",

doi = "10.3969/j.issn.1004-132X.2022.09.011",

language = "繁体中文",

volume = "33",

pages = "1090--1097 and 1114",

journal = "Zhongguo Jixie Gongcheng/China Mechanical Engineering",

issn = "1004-132X",

publisher = "China Mechanical Engineering Magazine Office",

number = "9",

}

TY - JOUR

T1 - 面向轴孔类零件圆度误差评定的改进式最小区域圆法

AU - Song, Ci

AU - Jiao, Li

AU - Wang, Xibin

AU - Liu, Zhibing

AU - Chen, Hui

PY - 2022/5/10

Y1 - 2022/5/10

N2 - An improved minimum zone circle method was proposed for roundness error evaluation of shaft hole parts. Based on computational geometry, the distance relationship between measuring points was determined, and the solving processes of control points of minimum circumscribed circle and maximum inscribed circle were optimized according to polygon removal rule. Then, the minimum zone was constructed according to the relationship among the control points of the minimum circumscribed circle, the maximum inscribed circle and the minimum zone circle. Finally, the effectiveness and accuracy of the proposed method were verified by experimental results.

AB - An improved minimum zone circle method was proposed for roundness error evaluation of shaft hole parts. Based on computational geometry, the distance relationship between measuring points was determined, and the solving processes of control points of minimum circumscribed circle and maximum inscribed circle were optimized according to polygon removal rule. Then, the minimum zone was constructed according to the relationship among the control points of the minimum circumscribed circle, the maximum inscribed circle and the minimum zone circle. Finally, the effectiveness and accuracy of the proposed method were verified by experimental results.

KW - Improved minimum zone circle method

KW - Polygon removal rule

KW - Roundness error evaluation

KW - Shaft and hole part

UR - http://www.scopus.com/inward/record.url?scp=85130120870&partnerID=8YFLogxK

U2 - 10.3969/j.issn.1004-132X.2022.09.011

DO - 10.3969/j.issn.1004-132X.2022.09.011

M3 - 文章

AN - SCOPUS:85130120870

SN - 1004-132X

VL - 33

SP - 1090-1097 and 1114

JO - Zhongguo Jixie Gongcheng/China Mechanical Engineering

JF - Zhongguo Jixie Gongcheng/China Mechanical Engineering

IS - 9

ER -

面向轴孔类零件圆度误差评定的改进式最小区域圆法

Abstract

Access to Document

Other files and links

Fingerprint

Cite this