TY - GEN
T1 - Research on cutting stability of high-efficiency micro turn-milling compound machine tool based on lobes
AU - Zheng, Zhongpeng
AU - Jin, Xin
AU - Sun, Yewang
AU - Jiang, Xiyang
AU - Zhang, Zhijing
AU - Liu, Bingbing
N1 - Publisher Copyright:
© 2019 Trans Tech Publications Ltd, Switzerland.
PY - 2019
Y1 - 2019
N2 - In order to improve the cutting stability of high-efficiency micro turn-milling machine tools, avoid the chattering problem during the cutting process. In this paper, the chatter problem in the cutting process is studied based on the stable lobes. By analyzing the high-efficiency turn-milling machine tool mechanism and the turn-milling model, the micro turn-milling dynamic dynamic vibration model and the mathematical model of turn-milling chatter are obtained. Then, based on the hammer test method, the transfer function of the tool-workpiece system is obtained, and the turn-milling stable lobes of the high-efficiency micro turn-milling machine tool is constructed. Finally, the research on the stable zone of the turning main spindle parts, the turning back spindle parts and the high-frequency milling part are completed. The experimental research results guide and optimize the selection of cutting parameters for turn-milling process.
AB - In order to improve the cutting stability of high-efficiency micro turn-milling machine tools, avoid the chattering problem during the cutting process. In this paper, the chatter problem in the cutting process is studied based on the stable lobes. By analyzing the high-efficiency turn-milling machine tool mechanism and the turn-milling model, the micro turn-milling dynamic dynamic vibration model and the mathematical model of turn-milling chatter are obtained. Then, based on the hammer test method, the transfer function of the tool-workpiece system is obtained, and the turn-milling stable lobes of the high-efficiency micro turn-milling machine tool is constructed. Finally, the research on the stable zone of the turning main spindle parts, the turning back spindle parts and the high-frequency milling part are completed. The experimental research results guide and optimize the selection of cutting parameters for turn-milling process.
KW - Chatter
KW - Cutting stability
KW - Frequency response function
KW - Lobes
KW - Micro turn-milling
UR - http://www.scopus.com/inward/record.url?scp=85071883044&partnerID=8YFLogxK
U2 - 10.4028/www.scientific.net/SSP.295.59
DO - 10.4028/www.scientific.net/SSP.295.59
M3 - Conference contribution
AN - SCOPUS:85071883044
SN - 9783035714050
T3 - Solid State Phenomena
SP - 59
EP - 65
BT - Materials and Manufacturing Technology
A2 - Masood, Syed
PB - Trans Tech Publications Ltd.
T2 - Asia Conference on Material and Manufacturing Technology, ACMMT 2018
Y2 - 14 September 2018 through 16 September 2018
ER -