Influence of additives on hydration heat of mass concrete

Y. Li, M. Li*, H. Chen

*Corresponding author for this work

Research output: Contribution to journalConference articlepeer-review

1 Citation (Scopus)

Abstract

In this paper, the development of early hydration heat and the performance of large temperature difference of mass concrete structures are studied. Five mass concrete samples with two strength grades and five mixing ratios were made. The size of samples is 1000mm1000mm1400mm. Temperature sensors are embedded in the component while the components are constructed. Temperature of early hydration heat temperature rise and instant heating on one side are tested by the sensors. It is found that the early hydration heat temperature rise of self-made crack resistance concrete with internal curing agent or shrinkage reducing agent is lower than that of common commercial concrete. The results of single-side instantaneous temperature rise test show that the temperature changes least on the heating surface of concrete and most in the middle position.

Original languageEnglish
Article number012008
JournalIOP Conference Series: Materials Science and Engineering
Volume544
Issue number1
DOIs
Publication statusPublished - 2019
Externally publishedYes
Event2nd International Conference on Mechanical Engineering and Applied Composite Materials, MEACM 2018 - Harbin, China
Duration: 7 Dec 20188 Dec 2018

Fingerprint

Dive into the research topics of 'Influence of additives on hydration heat of mass concrete'. Together they form a unique fingerprint.

Cite this