Critical load determination for preventing rotational loosening in bolted joints under dynamic transverse loads

Jingdong Zhang, Weihao Li, Jiaming Feng, Ridong Liao*

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

3 Citations (Scopus)

Abstract

To ensure the reliability of bolted joints, it is essential to accurately determine the critical load that prevents rotational loosening of the nuts. In this paper, the mechanical behavior of bolted joints during tightening, after tightening, and under transverse loading was analyzed. The contact status of two mating surfaces, including the thread and nut bearing surfaces, and their ability to withstand transverse loads were calculated. Based on the conditions leading to rotational loosening, defined by the occurrence of sliding across both sets of contact surfaces, the critical condition for transverse force that precipitates rotational loosening in bolted joints has been established. Furthermore, a systematic procedure for determining this critical state of rotational loosening in bolted joint assemblies has been developed. Finite element simulations on bolted joints subjected to dynamic transverse loads, using various combinations of friction coefficients, showed results in good agreement with theoretical predictions. Finally, experimental measurements of the critical rotational loosening loads were conducted. The experimental results highlight that the decrease in clamping force due to non-rotational factors has a significant impact on the critical loads. Considering this influence and adjusting the preload accordingly, the calculated results for the critical loads are in good agreement with the experimental data.

Original languageEnglish
Article number108217
JournalEngineering Failure Analysis
Volume160
DOIs
Publication statusPublished - Jun 2024

Keywords

  • Bolted joints
  • Contact state
  • Rotational loosening
  • Threaded surface
  • Transverse loads

Fingerprint

Dive into the research topics of 'Critical load determination for preventing rotational loosening in bolted joints under dynamic transverse loads'. Together they form a unique fingerprint.

Cite this