Characterization and ablation resistance of ZrB2-xSiC gradient coatings deposited with HPPS

Yixin Bai, Quansheng Wang, Zhuang Ma, Yanbo Liu*, Haikun Chen, Kangzhi Ma, Shijie Sun

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

6 Citations (Scopus)

Abstract

To improve the oxidation protection of carbon fiber-reinforced carbon (C/C) composites, a four-layer ZrB2-xSiC gradient coating was designed and deposited on a C/C substrate by high-power plasma spraying (HPPS). The phases and microstructures of the spray powders and gradient coating were characterized. The results showed that as the SiC content increased, the molar ratio of ZrB2 to SiC approached the eutectic point gradually, more eutectic structures can be produced in the spray powders; thus, the porosity of the gradient coating decrease accordingly from the outer to the inner layer. The anti-ablation property of the ZrB2-xSiC gradient coating and ZrB2-50 vol% SiC (Z5S5) and ZrB2-20 vol% SiC (Z8S2) single-component coatings were investigated by the oxyacetylene flame (OAF) test. The mass ablation rate of the ZrB2-xSiC gradient coating surged from 1.63 × 10-4 to 2.46 × 10-3 g/s because the evaporation speed of the ablative product (SiO2) increased rapidly as the ablation temperature increased from 1900 °C to 2200 °C, respectively. Compared with those of the Z5S5 and Z8S2 coatings, the gradient coating had a better ablation resistance owing to the formation of a dense ZrO2 top-layer structure and decreased thermal stresses.

Original languageEnglish
Pages (from-to)14756-14766
Number of pages11
JournalCeramics International
Volume46
Issue number10
DOIs
Publication statusPublished - Jul 2020

Keywords

  • Anti-ablation property
  • Gradient coating
  • High-power plasma spraying
  • Oxyacetylene flame test
  • ZrB-SiC

Fingerprint

Dive into the research topics of 'Characterization and ablation resistance of ZrB2-xSiC gradient coatings deposited with HPPS'. Together they form a unique fingerprint.

Cite this