跳到主要导航 跳到搜索 跳到主要内容

Yaw stability control through independent driving torque control of mid and rear wheels of an articulated bus

  • Beijing Institute of Technology

科研成果: 期刊稿件 › 文献综述 › 同行评审

摘要

This paper describes a novel yaw stability control strategy for a four-wheel-independent-drive electric articulated bus with four motors at the middle and rear wheels. The proposed control strategy uses a hierarchical control architecture. In the upper layer, a 3 degree-of-freedom reference model is established to obtain the desired vehicle states and the desired yaw moments of the front and rear compartments are determined by means of sliding mode control, respectively. The lower layer distributes differential longitudinal forces according to the desired yaw moments based on quadratic programming theory. The tire utilization rate is used as the optimization goal considering the actual constraints. To verify performance, three test cases are designed on the dSPACE-ASM simulation platform. The test results show the proposed control strategy can improve the yaw stability and the trajectory following performance of the bus under different driving conditions.

源语言英语
页(从-至)2947-2960
页数14
期刊Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
卷234
期13
DOI
出版状态已出版 - 1 11月 2020

学术指纹

探究 'Yaw stability control through independent driving torque control of mid and rear wheels of an articulated bus' 的科研主题。它们共同构成独一无二的学术指纹。

引用此