跳到主要导航 跳到搜索 跳到主要内容

Wideband 3D printed conformal dielectric antenna with end-fire radiation

  • Jin Huang
  • , Shenjian Jammy Chen
  • , Zhenghui Xue
  • , Withawat Withayachumnankul
  • , Christophe Fumeaux
  • Beijing Institute of Technology
  • University of Adelaide

科研成果: 书/报告/会议事项章节 › 会议稿件 › 同行评审

摘要

In this paper, a conformal 3D-printed endfire dielectric antenna with wideband performance is proposed. The device contains a multi-section dielectric block that is designed with stepped permittivities to attain a wide bandwidth. Through altering the infill percentage during 3D printing, the effective relative permittivity of dielectric segments can be precisely controlled in the range of 8.5 to 2.5. The antenna can be printed to be conformal to a curved metal ground plane to obtain an end-fire radiation beam with a reduced tilt angle. Measured results confirm a wide impedance bandwidth of 67.4% from 6.2 to 12.5 GHz, a stable end-fire beam and a realized gain above 7 dBi over the whole operation band.

源语言英语
主期刊名2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings
出版商Institute of Electrical and Electronics Engineers Inc.
页1909-1910
页数2
ISBN(电子版)9781728106922
DOI
出版状态已出版 - 7月 2019
活动2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Atlanta, 美国
期限: 7 7月 2019 → 12 7月 2019

丛书

姓名2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019 - Proceedings

会议

会议2019 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting, APSURSI 2019
国家/地区美国
市Atlanta
时期7/07/19 → 12/07/19

学术指纹

探究 'Wideband 3D printed conformal dielectric antenna with end-fire radiation' 的科研主题。它们共同构成独一无二的学术指纹。

引用此