TY - JOUR
T1 - Topology optimization and experimental validation of monolithic torsional metastructures for low-frequency vibration isolation
AU - Hu, Yue
AU - Wang, Dongxian
AU - Zhou, Hao
AU - Ma, Yun
AU - Shao, Haicheng
AU - Lai, Qingcun
AU - Zhou, Pingzhang
AU - Kovacic, Ivana
AU - Zhu, Rui
N1 - Publisher Copyright:
© 2026 Elsevier Ltd
PY - 2027/1
Y1 - 2027/1
N2 - Shafting systems require compact torsional isolators that can suppress low-frequency vibrations without compromising reliable torque transmission. This study proposes an inverse design framework for monolithic torsional metastructures by integrating topology optimization, conformal mapping, geometric feasibility screening, and nonlinear finite element analysis. Topology optimization is first performed in a uniform rectangular computational domain, after which the optimized topology is conformally mapped onto a sector module and circumferentially replicated to construct the complete annular metastructure. By prescribing the torque–rotation response over a target operating interval, the framework enables the realization of positive, quasi-zero, and negative stiffness characteristics. For quasi-zero stiffness designs, the prescribed operating torque, interval width, and interval center can be independently customized to satisfy different application requirements. The optimized thermoplastic-polyurethane metastructure is fabricated by additive manufacturing and evaluated through both quasi-static and dynamic experiments. The measured torque–rotation and stiffness–rotation responses agree well with the numerical predictions, particularly within the prescribed low-stiffness interval. Dynamic transmissibility tests under two bias-torque conditions further demonstrate initial vibration isolation frequencies of approximately 14 and 7 Hz, respectively, while the theoretical model captures the measured resonance characteristics and the subsequent attenuation trends. These results establish an application-oriented route for designing compact, integrated torsional isolators with programmable torque transmission and low-frequency vibration isolation performance.
AB - Shafting systems require compact torsional isolators that can suppress low-frequency vibrations without compromising reliable torque transmission. This study proposes an inverse design framework for monolithic torsional metastructures by integrating topology optimization, conformal mapping, geometric feasibility screening, and nonlinear finite element analysis. Topology optimization is first performed in a uniform rectangular computational domain, after which the optimized topology is conformally mapped onto a sector module and circumferentially replicated to construct the complete annular metastructure. By prescribing the torque–rotation response over a target operating interval, the framework enables the realization of positive, quasi-zero, and negative stiffness characteristics. For quasi-zero stiffness designs, the prescribed operating torque, interval width, and interval center can be independently customized to satisfy different application requirements. The optimized thermoplastic-polyurethane metastructure is fabricated by additive manufacturing and evaluated through both quasi-static and dynamic experiments. The measured torque–rotation and stiffness–rotation responses agree well with the numerical predictions, particularly within the prescribed low-stiffness interval. Dynamic transmissibility tests under two bias-torque conditions further demonstrate initial vibration isolation frequencies of approximately 14 and 7 Hz, respectively, while the theoretical model captures the measured resonance characteristics and the subsequent attenuation trends. These results establish an application-oriented route for designing compact, integrated torsional isolators with programmable torque transmission and low-frequency vibration isolation performance.
KW - Conformal mapping
KW - Monolithic metastructure
KW - Quasi-zero stiffness
KW - Topology optimization
KW - Torsional vibration isolation
UR - https://www.scopus.com/pages/publications/105051715365
U2 - 10.1016/j.tws.2026.115700
DO - 10.1016/j.tws.2026.115700
M3 - Article
AN - SCOPUS:105051715365
SN - 0263-8231
VL - 232
JO - Thin-Walled Structures
JF - Thin-Walled Structures
M1 - 115700
ER -