TY - JOUR
T1 - Strategy for treating highly bio-polluted wastewater using fluidized MOF/GAC composites in an ultrafiltration system
AU - Wang, Yi
AU - Tang, Mingshuo
AU - Li, Zhuang
AU - Wang, Jingwei
AU - Cai, Weiwei
N1 - Publisher Copyright:
© 2026 Elsevier Ltd.
PY - 2026/10
Y1 - 2026/10
N2 - Ultrafiltration (UF) is widely used for microbial removal from water and wastewater. However, its inability to inactivate retained microorganisms often leads to severe membrane biofouling when treating highly bio-polluted wastewater. To overcome this limitation, this study developed MOFs/GAC composites by chemically immobilizing antimicrobial metal-organic frameworks (MOFs) onto granular activated carbon (GAC) particles and subsequently integrating the fluidized composites with a UF process for biofouling control. Comprehensive characterizations verified the successful synthesis of Ag-MOFs, Cu-MOFs and Fe-MOFs and their chemical immobilization on GAC particles via polydopamine coating and mercapto-poly(ethylene glycol)-carboxylic acid linkage. Operational results demonstrated that such MOFs/GAC-UF systems significantly reduced biofouling formation through synergistic physical scouring and MOF-mediated chemical biocidal action. The fluidized Ag-MOFs/GAC composites exhibited optimal sterilization efficacy of 92.2%-95.7% against suspended E. coli , S. aureus and M. aeruginosa even at a high microbial concentration of 10⁸ CFU/mL. As the ion reservoir, three MOFs sustainably released antimicrobial ions in the forms of Ag+, Cu2+ and Fe3+ into wastewater, which could be partially retained by biofilm, resulting in the massive cell death in suspension and on membrane surfaces. Meanwhile, the amounts of ions detected in the effluent remained substantially below drinking water standards, indicating a low risk of metal contamination under the investigated conditions. Consequently, this novel strategy addresses the current challenge of treating highly bio-polluted wastewaters, where the microbial concentrations at least 100 times higher than those found in conventional waters or wastewaters.
AB - Ultrafiltration (UF) is widely used for microbial removal from water and wastewater. However, its inability to inactivate retained microorganisms often leads to severe membrane biofouling when treating highly bio-polluted wastewater. To overcome this limitation, this study developed MOFs/GAC composites by chemically immobilizing antimicrobial metal-organic frameworks (MOFs) onto granular activated carbon (GAC) particles and subsequently integrating the fluidized composites with a UF process for biofouling control. Comprehensive characterizations verified the successful synthesis of Ag-MOFs, Cu-MOFs and Fe-MOFs and their chemical immobilization on GAC particles via polydopamine coating and mercapto-poly(ethylene glycol)-carboxylic acid linkage. Operational results demonstrated that such MOFs/GAC-UF systems significantly reduced biofouling formation through synergistic physical scouring and MOF-mediated chemical biocidal action. The fluidized Ag-MOFs/GAC composites exhibited optimal sterilization efficacy of 92.2%-95.7% against suspended E. coli , S. aureus and M. aeruginosa even at a high microbial concentration of 10⁸ CFU/mL. As the ion reservoir, three MOFs sustainably released antimicrobial ions in the forms of Ag+, Cu2+ and Fe3+ into wastewater, which could be partially retained by biofilm, resulting in the massive cell death in suspension and on membrane surfaces. Meanwhile, the amounts of ions detected in the effluent remained substantially below drinking water standards, indicating a low risk of metal contamination under the investigated conditions. Consequently, this novel strategy addresses the current challenge of treating highly bio-polluted wastewaters, where the microbial concentrations at least 100 times higher than those found in conventional waters or wastewaters.
KW - Granular activated carbon
KW - Highly bio-polluted wastewater
KW - Membrane biofouling
KW - Metal-organic framework
KW - Sterilization performance
UR - https://www.scopus.com/pages/publications/105046003896
U2 - 10.1016/j.jece.2026.124363
DO - 10.1016/j.jece.2026.124363
M3 - Article
AN - SCOPUS:105046003896
SN - 2213-2929
VL - 14
JO - Journal of Environmental Chemical Engineering
JF - Journal of Environmental Chemical Engineering
IS - 5
M1 - 124363
ER -